Post Created date
Simple coding question ATTINY402
I had found the getting started doc, and it says.. .. "The instances of the PORT peripheral registers control the I/O pins of the device.." What on earth is an instance of a port...
Tuesday, 9 February 2021 - 19:56
ATTINY402 and UPDI Grief -- Reads as TINY406
Here's another question - -perhaps worth of a separate thread, but since it's related to my current issues, I'll ask here..  Can compiling and loading a project then simply...
Tuesday, 19 January 2021 - 09:30
ATTINY402 and UPDI Grief -- Reads as TINY406
El Tangas wrote:It's not the first time this issue pops up. Here are some links with some information:   Oh right!! Thanks for finding that. I have spoke to RS, but of course...
Monday, 18 January 2021 - 16:11
ATTINY402 and UPDI Grief -- Reads as TINY406
I'm simply used to ORing bits to the PORT register, and having used a 'Framework' for the ST chips.. Toggling pins never seemed to be as simple as a nice OR or AND. Maybe I...
Monday, 18 January 2021 - 16:07
ATTINY402 and UPDI Grief -- Reads as TINY406
So.. I had to build a program based on the ATTINY406, because Studio wouldn't upload to a 402 type device ... Of course, nothing is simple.. but having created a simple program...
Monday, 18 January 2021 - 14:31
ATTINY402 and UPDI Grief -- Reads as TINY406
Its not my code. Its opensource i2c encoder. I'm cheating for this part of the project, but the sample modules I bought work fine. So the simplest thing.. is causing untold...
Sunday, 17 January 2021 - 20:48
uPDI & SPI Programmer using ESP32
This is interesting for me.. I have a Tiny402 connected to an ESP32. However, it seems your code is built around platform IO whereas I use Arduino and TBH I don't want to get to...
Sunday, 17 January 2021 - 09:47
Mega1284P Timer3 Vector Created but not in Vector Table
Ahhhh..  So now I see what I've done! I meant to use compare B, I enabled compare B, but I created vector Compare A. Thanks everyone.. I will see if that fixes it!
Tuesday, 2 June 2020 - 09:53
Mega1284P Timer3 Vector Created but not in Vector Table
  I read and take onboard your comments thanks.. but what's with this from the datasheet?   The code jumps to vector 0x0042 when I allow this timer to get to its...
Tuesday, 2 June 2020 - 09:22
Mega1284P Timer3 Vector Created but not in Vector Table
Sorry Clawson.. Just read your first post. Somehow I've got my vectors mixed up in my mind...  let me go check what the hell I've doing. :)
Tuesday, 2 June 2020 - 09:09
Mega1284P Timer3 Vector Created but not in Vector Table
Using SREG is habit.. it's copied very old code. However, using sei() can be valid when the interrupt routine must give way to a higher priority interrupt if it unfortunately can'...
Tuesday, 2 June 2020 - 08:58
Programming ATmega328PB ispEnterProgMode fail
I don't. Not off hand, but if you cannot connect to it then you can't change them anyway. If you're starting with a fresh device, then make sure the programmer shows you all the...
Saturday, 25 April 2020 - 09:01

Pages