Post Created date
Best way to inline a function?
Because inline is only a suggestion to compiler You may use __attribute__((always_inline)) in the function declaration.
Tuesday, 6 May 2014 - 16:57
20% off Saleae products [L/A discussion/recommends]
meslomp wrote:reading this worries me a bit: Quote:Logic16 can sample 2 channels 100MHz, 4 channels at 50MHz, 8 channels at 25MHz or all 16 channels at 12.5MHz and can record up...
Sunday, 23 February 2014 - 21:36
SPI over 3 meters
Shagas wrote:If for each pin I sent the signal and a mirror of the signal using an inverter and at the reciever used an op amp in a differential configuration would that do the...
Monday, 16 September 2013 - 16:46
SPI over 3 meters
My friend use SPI in power drivers (4 channels, ~100A PWM with 20kHz carrier frequency). He use the RS485 as hardware layer (each SPI signal has their own 2-wire line) and he...
Monday, 16 September 2013 - 16:19
Screw terminal blocks: SMT or through-hole reflow?
Because I know from my own experience how our devices are treated by fitters, so I never think about using SMS terminals in a new projects. IMHO all external connections must be...
Saturday, 29 December 2012 - 10:22
Is this ESD?
jayjay1974 wrote:Do you use a JTAG programmer? Try the serial ISP interface. It is possible to program the LPC2148 by ISP? The Thread is about this chip.
Wednesday, 28 November 2012 - 12:57
Raspberry what?!? Via introduces the $49 ARM computer
APC has one big disadvantage - it doesn't has GPIO. I think that after success of the Rpi many similar based on ARM small computers arrive in the near future.
Tuesday, 22 May 2012 - 16:22
60-Hz signal when I touch scope probe
Because You live in USA. In Europe we get 50 Hz. ;-) It's absolutely normal in places where is AC grid. Human body act as antenna and received waves may be seen on scope.
Monday, 20 June 2011 - 17:22
draw datasheet graph
gnuplot In documentation it has many examples with electronic graphs.
Wednesday, 12 January 2011 - 11:20
Strange issue when assigning variable a value. [solved]
Why you declare and initialize t1 inside switch statement? Try declaring it before this statement, this should help.
Monday, 15 November 2010 - 11:29
Real-world AVR examples?
pro-vent.pl/produkty,0.html http://www.pro-vent.pl/sterowniki,0.html - unfortunately only in polish. All controllers for ventilation and air conditioning systems and almost all...
Saturday, 16 October 2010 - 15:07
cycles required to keep up with 19200bps
It's possible to serve 115 kbs on an AVR working at 3.7 MHz with calculating of CRC when next char is received. If program code is carefully written and well optimized this is...
Wednesday, 8 September 2010 - 21:59

Pages