Post Created date
ATtiny85 + 100 ohm resistor = RFID tag?
Yes it's a 1mH (1000µH) ±10% inductor (or coil as he calls it). Please note the third ring is red and not brown as you can see if you look at the hires picture. So even if it...
Sunday, 28 June 2009 - 09:50
lm7805 and AMC7135
He said in his first post that he is only going to light a single LED 1.5 A max. So there's no LEDs put in series or parallel: pm6041141 wrote: More specifically, I am trying to...
Friday, 26 June 2009 - 18:30
Wire length on ISP with JTAGICE mkII
And have you tried to slow down the ISP programming speed?
Friday, 26 June 2009 - 12:13
USB connection
skafte wrote:So many users, and not a single reply. And in how many topics have you tried to help other members with their problems?
Friday, 26 June 2009 - 09:47
lm7805 and AMC7135
Sorry but I will say it's stupid to make a buck converter to get the voltage down from 12V to 6V, when you can instead just use a buck-converter conneted directly to the 12V...
Friday, 26 June 2009 - 00:17
Debugging with JTAGICE mk-ii
There's a 19 minutes video tutorial at AVR TV: Debugging with JTAGICEmkII http://www.avrtv.com/2008/09/25/...
Thursday, 25 June 2009 - 21:27
Wire length on ISP with JTAGICE mkII
Slow down the programming speed, that might help. Are you AVR decoupled properly? Do you use external or internal oscillator? Have you anything else connected to the ISP lines?
Thursday, 25 June 2009 - 21:22
what kind of socket for AVR ATMEGA168_10MU 32-pad QFN/MLF
PLCC sockets are for PLCC devices, they wont fit QFN/MLF. PLCC has leads, QFN/MLF has no leads. You don't use sockets for QFN/MLF devices. They are soldered directly onoto the...
Thursday, 25 June 2009 - 13:09
Memory Recommendations?
You could also have used an SPI 25xxx EEPROM instead of an 24xxx EEPROM. But so far the ony 64kB SPI EEPROM seems to be Atmel AT25512: http://www.atmel.com/dyn/product... But it...
Thursday, 25 June 2009 - 09:06
lm7805 and AMC7135
jgmdesign wrote:@OP, I don't know where you are located, but in the USA unless you are driving an emergency vehicle(police/fire/ambulance) none of the lights on your car other...
Wednesday, 24 June 2009 - 20:48
Help with a symbol in a schematic
Yes that schematic is drawn in Protel/Altium and a red x means NC. I cn see this is the Igor Plug FW USB implementation. FYI: There's also another FW implemetation of USB in AVR....
Wednesday, 24 June 2009 - 19:35
lm7805 and AMC7135
I would throw those 4 amc7135 drivers away and use a single step-down (Buck) SMPS LED driver that can operate directly from the input voltage. This will also be much more power...
Wednesday, 24 June 2009 - 18:11

Pages