Post Created date
missing stk600 from atmel site
finally I download it.Thank you Happen that i search for stk600 then on results i click on stk600 manual and after that redirect me to home page of microchip I download it by...
Wednesday, 10 January 2018 - 15:15
missing stk600 from atmel site
yes i find it but i can not download it  
Wednesday, 10 January 2018 - 09:50
No Mac OS X version of Atmel Studio 7
i have mac laptop and mac desktop and i ave to work on windows and use boot camp only for avrstudio. They have to write studio and for mac with the same futures as many companies...
Monday, 9 October 2017 - 22:17
what transistor for ignition coil?
thanks rickb i didnt think to search before for cdi.
Tuesday, 28 August 2012 - 08:44
what transistor for ignition coil?
All the mini bikes like honda inovva ,lifan motors yamaha etc on little bikes use possitive switching side. In my bike i can make it with negative no problem for me but what to...
Monday, 27 August 2012 - 16:40
what transistor for ignition coil?
I have found many special design transistor for ifnition coil but all is npn. I have to swtch the positive side so i need pnp
Monday, 27 August 2012 - 10:00
2 mega168 with uart hot plug problem
Ok problem solved with 10k pull up resistor on rx pin. Thank you
Thursday, 31 May 2012 - 14:22
2 mega168 with uart hot plug problem
thank you for your fast answer My baudrate is 38400 i will try first with pull up for rx pin and pull down for tx. 1kohm is good ? If I don't hot plug the second mc and power on...
Thursday, 24 May 2012 - 22:29
atmega168 and rtc 32768 crystal
Ok i change the code and the crystal on expand1 connector and again nothing :(
Monday, 12 March 2012 - 15:26
atmega168 and rtc 32768 crystal
theusch wrote:Quote: .ORG $0000 .def TMP1 = R22 .def TMP2 = R23 .DEF COUNTER = R24 RJMP RESET rjmp TIM2_OVF Surely you meant something like .def TMP1 = R22 .def TMP2 = R23 ....
Monday, 12 March 2012 - 14:22
atmega168 and rtc 32768 crystal
datasheet of mega168 note pb6,pb7 as tosc1,tosc2 and according the stk500 manual this pins are on expand1. You mean that the correct pins are 17,18 on expand1? I will try it The...
Monday, 12 March 2012 - 14:01
Studio 4 operand error
Thanks a lot I try it tonight hope it will work now
Wednesday, 7 March 2012 - 09:40

Pages