Type in the full discussion title or a part of it.
Discussion Title Created date
AVR One is dropping IO voltage
I'm developing an ATTiny85 project. 9VDC is fed to the board where it gets regulated down to 5V. My test program just outputs a square wave on all 6 IO pins. Everything looks...
Wednesday, 23 July 2014 - 21:19
AVR One + ATTiny85: I can emulate but can't read/set fuses
I'm using AVR One with AS 6.2 to develop an ATTiny85 project. I'm able to download my code to the 85 and run it under emulation, but I'm unable to read or set my fuses, device...
Tuesday, 22 July 2014 - 04:50
Low cost, wireless DMM on Dragon Innovation
The Mooshimeter: http://www.dragoninnovation.com/... Only $99, but only 23 hours left. I picked one up just for the ability to take two readings simultaneously, but the rest of...
Thursday, 20 February 2014 - 05:30
Weatherproof AC power pass-through
I need to put an AC-powered device outside in a weatherproof box. I'd like to run the power into the box via some sort of purpose-built, weatherproof jack/connector/pass-through...
Monday, 2 December 2013 - 17:39
Question about verifying with AVRISP MkII
I'm getting ready.to make some changes to an ATMega128 project I haven't touched in several years. I want to make sure I can restore the code to its current state if I screw...
Monday, 18 November 2013 - 07:31
AS6.1 is unable to start my debug session
I'm slowly figuring out how to debug an ATTiny85 project with AS6.1 and AVR One. There seem to be many more quirks than with AS4, which I'm upgrading from. Anyway, I can now go...
Tuesday, 5 November 2013 - 01:47
Getting started w/ AS6, AVR One, and external compiler
I'm transitioning from AS4 to AS6. I compile with ICCAVR and debug with AVR One. With AS4 I could just open the .cof and start debugging. Not so with AS6. I've read the docs...
Monday, 4 November 2013 - 17:59
Seeking authoritative reference for 100K EEPROM write limit
I know the datasheets for ATMegas state there's a 100K limit on EEPROM writes, and there are many mentions on the forum that this limit applies to individual bytes within the...
Monday, 14 October 2013 - 22:39
debugWire + AVR One debugging/programming confusion
I'm using an AVR One to program/debug an ATTiny85 board running on the Tiny's internal oscillator. This is a board I developed a few months ago, programmed/debugged, put aside...
Saturday, 3 August 2013 - 21:49
Why am I drawing so much current when asleep mode (Tiny85)?
I'm a newb when it comes to sleep modes so I'd appreciate some guidance from those who aren't. I'm using an ATTiny85, running of the internal 8MHz oscillator and use the...
Tuesday, 16 April 2013 - 23:13
Could use a little help getting started with AVRS 6
I'm trying to make the jump from AVRS 4 to AVRS 6 and it's a little confusing. I use ICCAVR, so I'm used to compiling in that environment and then opening the COFF in AVRS to...
Wednesday, 20 March 2013 - 21:04
Seeking advice on low-current power supply
I'm building a project that will be powered from a 24VDC wall wart which will power a solenoid. I need to step this down to 5VDC at 10 mA for my logic. The circuit will be...
Sunday, 17 March 2013 - 22:00

Pages