| Discussion Title | Created date |
|---|---|
|
Neodymium magnets as logic-analyser probes One of the most difficult parts of examining any electronic signal on a modern PCB is the inability to get an oscilloscope probe tip or set of logic-analyser probe tips actually... |
Friday, 30 June 2017 - 23:49 |
|
Using accented characters with Arduino While making a French/English flash card program, it became apparent that there was no easy way to work with accented characters. The simplist way is to ignore the... |
Thursday, 22 December 2016 - 00:19 |
|
Any standard Arduino color codes? I've started using a self-defined set of color codes for my Arduino projects and I thought that I should ask if there are already some color codes in general use. I bought six... |
Wednesday, 27 July 2016 - 23:52 |
|
Need help determining TFT controller I recently bought a 320x240 2.4" TFT with touch-screen in a Arduino-UNO shield format. I've bought three previously and one was a ILI9325 and other two were ST7781... |
Tuesday, 10 November 2015 - 00:57 |
|
endless effing junk software from Atmel and everyone else Today I tried to load the latest changes in an assembler application program into my Mega168 AVR. Like I have done a hundred times before in the past few months using Studio 4... |
Wednesday, 5 September 2012 - 18:33 |
|
plugging USB keyboard into AVR I am interested in plugging a simple standard cheap USB keyboard into a simple standard cheap AVR. For old purple-connector PS2 keyboards, this was not hard. There were two lines... |
Friday, 29 June 2012 - 19:57 |
|
Port pin voltage doubler OK? I want to run an +5.0v LCD display from a +3.3v AVR system. Is it possible or feasible to create the +5v from a voltage doubler on two port pins toggling 3.3v through the diode/... |
Friday, 25 May 2012 - 01:06 |
|
motion sensor question I would like to put three LCD character displays into a long triangle shape like a Toblerone package. The display facing the viewer would display text. There would be thousands... |
Wednesday, 7 July 2010 - 02:53 |
|
Studio 4 installation order What is the order for installing Studio 4? Atmel offers 4.18 (build 684, 116Mb, 11/09) and two service packs (SP1,build 692,12/09 and SP2,build 700,2/10). Is is necessary to... |
Friday, 14 May 2010 - 23:27 |
|
Advice requested on AVR debugging tools I am interested in the Arrow Electronics promo offer of an AVR JTAGICE mkII for $149. Hopefully this special promotion is still available (mid-May 2010) even if there is a one or... |
Tuesday, 11 May 2010 - 17:38 |
|
How would I make an AVR radio-recorder? I'd like a device that I could use to record the BBC World-Service off NPR (National Public Radio - a network of stations in the USA that is not exclusively commercials and pop... |
Wednesday, 25 November 2009 - 03:53 |
|
_BV(nn) macro doesn't work correctly I noticed that the _BV(n) macro is not working. My main procedure has a couple of peripheral register init statements. void Main () { uint8_t temp; temp... |
Wednesday, 8 April 2009 - 02:44 |