Type in the full discussion title or a part of it.
Discussion Title Created date
Split from: AVR vs. TI MSP430
Hi All,   I was just about to create a new post when I came across this OLD post from 2003. Basically, I have a suite of products that use the MSP430F1611IPM and ...
Wednesday, 6 February 2019 - 03:31
Is the XMega going End of Life (EOL) ???
Hi and Seasons Greetings, I was just looking to start some new projects using the bigger XMega chips ie ATXMega128 or 256 and I notice on the Microchip website that the only...
Monday, 25 December 2017 - 11:51
Mega2560 not responding to programmer
Hi, I have a Mega2560 that will not respond to the programmer either via ISP or JTAG. I did program it once and I think I must have set a fuse somewhere. Oops. Any ideas on how to...
Friday, 29 January 2016 - 21:57
GoldPhoenix/MyroPCB Panel question
Hi All, I have a few PCB designs in Eagle and I thought I would give GoldPheonix or MyroPCB a go with making these. Up until now, I have been using a PCB manufacturer in Australia...
Friday, 11 May 2012 - 03:09
Zigbee for Home Automation - Where to start ???
Hi All, I'm not new to Home Automation (I've developed hardware using X10, 1wire, RS485, all using Mega IC's etc) but I'm new to Zigbee and it's variations. Currently I program in...
Wednesday, 28 March 2012 - 22:25
Arduino stackable connectors
Hi, Does anyone know what the brand & model of the Arduino stackable headers are? ie http://littlebirdelectronics.com/products/arduino-stackable-header-kit I'm actualling...
Sunday, 6 November 2011 - 11:33
My 1st XMega Project
HI All, I'm starting a new project with LCD, SPI, TWI, Ethernet, MMC etc and thought I would give a XMega IC a try. So which device to pick? With the above hardware in mind, I'm...
Monday, 31 October 2011 - 07:16
25V Negative LCD Bias circuit required
Hi All, The LCD I'm using requires a negative voltage down to -25V @...
Tuesday, 26 July 2011 - 22:43
New PCB design using a Mega128 & the Public
Hi All, I'm making a new PCB that will use the Mega128. I'm looking at selling these boards to the general public and I'm trying to add a bit of protection to the I/O pins....
Sunday, 22 May 2011 - 10:14
PCB Design - SMD components on bottom side
Hi All, I'm designing a PCB using surface mount components and I'm runnng out of room on the top side. For the first few PCB's, I will probably hand assemble the prototypes myself...
Monday, 16 May 2011 - 23:42
Wanted - Eagle PCB library with a QFN48 package
Hi, Anybody have a eagle library with a QFN48 package in it? I'm just looking for the package layout, so any IC that uses this layout would do. Thanks, Neil.
Saturday, 19 March 2011 - 04:53
Atmel Touch Library & C. Where do I start
Hi All, I want to make some touch panels using the TLib/QTLib (Atmel QTouch library). BUT, the problem is that the compiler and programmer I use does not support the library....
Tuesday, 16 November 2010 - 11:42