Type in the full discussion title or a part of it.
Discussion Title Created date
Please recommend a US based quickturn board house!
Hi there - I need a new PCB fab. I used Advanced Circuits loyally for about 3 years up until about 6 months ago when their service went down the drain. I found that I could no...
Thursday, 11 September 2008 - 22:14
Source for 6 pin AVR-ISP connector?
Howdy gents - I swear we've covered this before but I couldn't find a thread with a US source (ideally Digi-Key) for these buggers. What I want is the 6 pin shrouded connector for...
Saturday, 28 June 2008 - 19:48
AVRs with integrated wireless transceiver?
Howdy - somehow I had it in my head that there was an AVR that had an integrated RF transceiver in it. However, when looking at the Atmel website, all I seem to be able to find...
Friday, 2 May 2008 - 17:04
Anybody ever run a CAN AVR at >1Mbps?
Howdy - has anybody ever run any of the CAN AVRs at greater than 1 Mbps? I know, I know - they are rated only up to 1Mbps and all CAN physical layers are rated for up to 1Mbps....
Wednesday, 12 March 2008 - 13:35
Support for ATMEGA32M1/ATMEGA64M1?
Hi there - does anybody know when AVR GCC will support the ATMEGA32M1/ATMEGA64M1? Thanks!
Thursday, 6 March 2008 - 04:23
Possible to program AVR without erasing it?
Howdy - I just started using the eeprom on my ATMEGA168s. I am programming them over ISP with my Dragon at 2MHz, while they have a 20MHz crystal attached. I have a number of...
Monday, 3 March 2008 - 00:13
How to define eeprom contents in .c/,h file?
Hi - is there any way to define the contents of your eeprom in a .c or .h file? I looked through the winavr documentation and all I could find was stuff about defining the...
Sunday, 24 February 2008 - 02:39
Issue with watching variable in simulator
Hi there - I was just running through the tutorial from this thread: https://www.avrfreaks.net/index.p... Everything seems to work just fine, except for watching variables. I...
Monday, 8 October 2007 - 19:27
Good all-encompassing intro to AVRs?
Hi - I'd like to send a friend down the AVR learning path. I have a number of Atmel dev tools I can hook him up with (STK500, Butterfly, Dragon, AVR-ISP, JTAG-ICE MKII). Are there...
Thursday, 13 September 2007 - 11:53
Designing a high current (10A) voltage buffer
Hey there - so my job doesn't allow me to do much in the way of analog design, so for fun last night I decided to design a high current voltage buffer. The idea is that it'd take...
Saturday, 28 July 2007 - 18:13
high voltage boost converters
Hi there - I'm trying to step up a 5VDC supply to an adjustable 50-300VDC. Current will not be more than 2ma on the high voltage line. I need very good stability on the line as...
Thursday, 19 July 2007 - 12:06
how to determine number of sectors of mmc/sd card?
Hi there - I'm working on writing some MMC/SD initialization code. I'm trying to figure out how to determine the number of sectors in a card. Where is this defined? I can't seem...
Sunday, 20 May 2007 - 00:17