Post Created date
[solved] DS18B20 always giving 85.0000
Hi Brutte, This works while interrupts enabled: #define ONEWIRE_PULL_BUS_HIGH(bitMask) \ ONEWIRE_PORT |= bitMask; \ ONEWIRE_DDR |= bitMask; The other way around...
Tuesday, 22 January 2013 - 09:09
[solved] DS18B20 always giving 85.0000
You were right, 4.7K works fine now, it was a good feeling to heat the soldering iron again :) It was a forgotten step in the code from the beginning then.. I modified the...
Sunday, 20 January 2013 - 19:03
[solved] DS18B20 always giving 85.0000
This comment is related to the normal power mode, not parasite. It is actually the sensor that is holding the line LOW when it is in normal power mode. When in parasitic mode,...
Sunday, 20 January 2013 - 18:02
[solved] DS18B20 always giving 85.0000
interesting and annoying thing I found today, after 4 days of work, I tried the parasitic mode, and it did not work. I read somewhere that 4.7K will not work, so I tried 2.2K, and...
Sunday, 20 January 2013 - 13:32
[solved] DS18B20 always giving 85.0000
In main.c there is ds18b20ReadTemperature function, you can find: // Send start conversion command. oneWireSendByte(DS18B20_START_CONVERSION, bus); Where you can also find #...
Saturday, 19 January 2013 - 18:36
Using WinAVR makefile with AVR Toolchain
I see, that's why it was complaining about the -f then, saying it is too early. Any way, I will keep the utils folder on C:\ and uninstall WinAVR and AVR Studio 6 then, fair...
Tuesday, 15 January 2013 - 16:58
Using WinAVR makefile with AVR Toolchain
you'r right! I'll read that, thoughI doubt it will tell me what the missing files are and how to modify the mfile to work with the new toolchain.
Tuesday, 15 January 2013 - 12:42
Using WinAVR makefile with AVR Toolchain
Come on Johan, don't be so hard on me, reading is different than learning :P
Tuesday, 15 January 2013 - 12:27
Using WinAVR makefile with AVR Toolchain
clawson, to be honest with you, my laptop resources are a bit limited, really I am not willing to add more RAM or change the laptop. This is one reason I wanted to use CLI with...
Tuesday, 15 January 2013 - 12:12
Using WinAVR makefile with AVR Toolchain
WOW,GNU Make manual, this is alone a disaster for me :- ) I will try to replace rm in the makefile with delete and see how it goes, hope it is just the rm command that has to be...
Tuesday, 15 January 2013 - 12:06
Using WinAVR makefile with AVR Toolchain
Thank you Johan. I see, then I will need WinAVR installation to get the missing tools, how sad indeed. I modified my path to this: C:\Program Files (x86)\Atmel\Atmel Studio 6.0\...
Monday, 14 January 2013 - 22:30
Using WinAVR makefile with AVR Toolchain
Seems there are a couple of executables that it tried to run but can't find them, I can't find what they are, but sure they are in C:\WinAVR-20100110\utils\bin, because when I add...
Monday, 14 January 2013 - 10:22

Pages