Type in the full discussion title or a part of it.
Discussion Title Created date
[solved] DS18B20 always giving 85.0000
Hi, I found this code which seems to be simple enough to fit tiny controllers (this was the main reason to using this code): LINK. Any way, the code was originally for atmega1284...
Saturday, 19 January 2013 - 06:53
Using WinAVR makefile with AVR Toolchain
Hi, I am interested in using the makefile from WinAVR to compile codes using Atmel AVR Toolchain (because there will be no longer any WinAVR releases), is it possible? Any way, is...
Sunday, 13 January 2013 - 10:27
Studio 6 admin privilege (new project) problem
I am using Atmel Studio 6 build 1996 on Win7 x64. When I need to create a new project: File -> new -> Project, the IDE hangs there forever and I have to kill the process. I...
Thursday, 10 January 2013 - 07:38
Current limiting resistor for 7-segment
I have 4 digits and need to supply a maximum of 15mA per segment, where each segment (RED) needs 2.1V. For example, the refresh rate is 220Hz, hence 55Hz/digit. How can I...
Thursday, 6 September 2012 - 05:24
MSI media center IR remote control
I am trying to find out which IR protocol MSI media center IR remote control is using. Model Nummer: S10-1200130-J16. Any body has an idea? RC5, NEC, etc.. thanks
Sunday, 3 June 2012 - 10:20
short/long IR remote control press
Hi, I was thinking about this for a couple of days, please look at it as a request to discuss possible codes for this request. Is there a bullet proof way to enable a project...
Sunday, 13 May 2012 - 21:31
IAR AVR #if #elif problem
I am trying to do the following in IAR AVR : #ifdef __IOM16_H #define __disable_watchdog() WDTCR |= (1<<WDTOE); WDTCR &= ~(1<<WDE); #elif __IOM8515_H #define...
Saturday, 5 May 2012 - 11:01
Hallo, I noticed that when I wanted to use timer1 in CTC mode, and set a value inside OCR1A and match interrupt, it doesn't matter whether I set WGM12 or not, it works as...
Thursday, 29 March 2012 - 12:27
code compiled on AVR Toolchain is very large
Hi, I attached two projects, one compiled with AVR Toolchain, and the other with WinAVR 2010. I had to change the chip from ATmega16 to ATmega32 because when compiled on AVR...
Thursday, 8 March 2012 - 11:02
AVR Studio 5.1.208 The application cannot start
Hi I am receiving this message from AVR studio
Saturday, 3 March 2012 - 10:49
MFile missing from avr tool chain? [Solved]
I used WinAVR in the past, and I remember there was a tool in start menu to create makefile, I can't remember what it was called, may be mfile, any way, I downloaded avr tool...
Friday, 2 March 2012 - 00:37
dead link
Hi, I am looking for the code on this page "SONY SIRC IR decoder" I contacted the author already, but seems he is not available: https://www.avrfreaks.net/index.p... If someone...
Wednesday, 31 August 2011 - 13:04