Type in the full discussion title or a part of it.
Discussion Title Created date
AVRUSBBoot Problem: Pagesize: -128
I am trying to get this to work on ATmega16, Windows XP x86 was saying "USB device not recognized". I changed BOOTLOADER_ADDRESS to 3800 in MAKEFILE because for ATmega16: 16384...
Monday, 20 December 2010 - 10:21
Where can I buy STK600 in Malysia
Hi, Where can I buy STK600 and its accompanying personalities in Kuala Lumpur? I have got a friend who is going there and I thought I could get them for a lower price. regards
Wednesday, 8 December 2010 - 08:05
detecting Zero-Crossing
I need to detect zero-crossing of 220V 50Hz mains lines. I thought of using ATmega8 comparator by connecting the comparator as shown in the attached figure. I don't know how to...
Sunday, 27 September 2009 - 08:45
Software I2C slave
I am looking for an implementation of software I2C slave using interrupt for chips that don't have TWI hardware. I am using USI for other purposes. Atmel Application note uses...
Sunday, 26 July 2009 - 11:29
Error Code: -2147467259
Loaded partfile: C:\Program Files\Atmel\AVR Tools\PartDescriptionFiles\ Error Code: -2147467259 I am using WinXP SP2. WinAVR-20080610. ATmega8. The IDE doesn's seem to be...
Saturday, 27 December 2008 - 20:47
WinAVR-20071221 & WinAVR-20080610
Attached code works for WinAVR-20071221 with optimization -Os and generates less code, while for WinAVR-20080610 it generates larger code and only works if optimization is -O0....
Saturday, 25 October 2008 - 19:38
JTAG mkII Problem
I was working yesterday with JTAG mkII, it was programming Flash and EEPROM successfully and also debugging ATmega16, suddenly it stopped programming the flash in JTAG mode and...
Friday, 11 April 2008 - 13:12
Driving 3 digits LED display
I need to drive 3 digit LED display with ATtiny2313. The display has 3 common cathod pins, and 8 shared pins for the 3 digits. I have some questions on mind: How can I avoid using...
Wednesday, 13 February 2008 - 08:02
More Editor features in AVRStudio
Hi, Is atmel intending to add more features to AVRStudio editor such as code auto complete, code folding, and other features such as those found in notepad++. Another thing, is it...
Sunday, 20 January 2008 - 19:26
RC5 code problem in Crossworks
Hi, I have a working code for RC5 compiled with WinAVR. I tried it on STK500 and its working fine without any problems. I ported this code into AVR Crosssworks and compiled fine,...
Thursday, 17 January 2008 - 10:15
Rotary Encoder
Hi, I need a working code for mechanical rotary encoder, based on interrupt INT0 for example, or timer interrupt, not polling. Thanks
Tuesday, 8 January 2008 - 12:05
ATmega128 Fuses Problem
I have an ATmega128 whose fuses are programmed as follows: 103 compatibility not used WDT always running JTAG disabled Debugging disabled ISP disabled Bootloader max size Ext...
Saturday, 10 November 2007 - 09:46

Pages