Type in the full discussion title or a part of it.
Discussion Title Created date
SMTP over Ethernut
Has anyone implemented smtp on the Ethernut platform that they would be willing to share. I have done a brief search and was suprised that it didnt turn up much. I would have...
Saturday, 26 November 2005 - 05:26
Ethernut ???
Hey All I have jus purchased an Ethernut Ver 2.1 RevB Dev Kit. I have installed Nut OS configurator 3.9.8 and built the example http app. When i try to build in Imagecraft i get...
Wednesday, 16 November 2005 - 00:51
Hey All I have a tried and tested circuit for a multi-spark capacitor discharge ignition module. It was orignally out of silicon chip 1997 issue for those in OZ. I have used them...
Friday, 12 August 2005 - 11:17
Compliance testing
Hi All I know this is sort of an open question based on the fact that there are a lot of unknowns in this equation, but in general does anyone have any experience with C-Tick...
Friday, 22 July 2005 - 10:29
Float's and Double's
Hey All I am currently using ICC. As far as i know ICC uses 32 bit for both float's and double's. Does anyone know if any of the other C compilers out there support a true 64bit...
Friday, 29 April 2005 - 01:35
External SRAM problem
Hey All I have a quirky problem with external sram at the moment. Basically i have a Mega64 interfaced to a Dallas DS124AB-85 (battery backed sram) through a SN74AHC573PWR and in...
Monday, 20 September 2004 - 23:03
Hey All Has anyone out there ever implemented SNMP on an AVR. I was hoping to send out alarms through the uart which is attached to a LANTRONIX UDS-10 (serial to TCP/IP converter...
Monday, 16 August 2004 - 02:58
Stack Pointer and ICC
Hey All Just wanting to find out if you need to initilize the stack pointer when using ICC. I was under the assumption that the compiler managed the SP and i did not need to...
Thursday, 29 July 2004 - 21:38
storing variables in X-Ram
Im am using ICC and am wondering how i can tell the compiler to store array's etc in specific locations in extended sram. Can anybody help?? Thanks Steve
Friday, 18 June 2004 - 04:17
Electronic design & AVR
I was wondering if anyone out there would be interested in helping me out or coming up with the complete design themselves for a circuit I need to design using an AVR chip to...
Tuesday, 6 August 2002 - 11:20
Re: STK501 Board and mega128
I am trying to track down a source to buy a stk501 board and mega128 chips and was wondering if anyone could point me in the right direction. I once got some AVR gear of REC...
Friday, 26 July 2002 - 14:47
Setup of Timer1 for PWM operation
I was wondering if anyone could help me out with some code for the setup of timer1 as PWM output on an 8535 in assembly. Thanks Steve
Friday, 26 July 2002 - 14:13