Post Created date
Small 9V -> 3.3V switching regulator, any recommendations
MC34063, easy to get and relatively efficient for step down from 9V. oddbudman
Tuesday, 20 October 2009 - 04:13
>80V npn BJT in SOT23 package??? Plenty here
Monday, 19 October 2009 - 09:04
5V AVR to lower voltage LEDs without resistors
Plons, Sorry to threadjack, but can you quickly explain how you got your cro to plot those waveforms? thx, oddbudman
Monday, 19 October 2009 - 01:49
Who makes/sells this battery holder?;jsessionid=0a0108431f43bd0f2c045f29493cb21fa6d66ba57615.e3eSbNyQc3mLe34Pa38Ta38Pchn0?it=A&id=6894 http://comf.manufacturer.globalsources....
Friday, 16 October 2009 - 11:03
5V AVR to lower voltage LEDs without resistors
Use a Resnet.
Friday, 16 October 2009 - 01:29
PCB Critique
Currently that's a pretty poor layout. Be prepared to give it a fair few more goes before you will get much positive feedback. This version has poor grounding, poor layout and...
Friday, 9 October 2009 - 01:38
Current Limiting Diode (CLD)
Which company are you using for the cells / charger? I know a few people in the battery business, I might be able to put you onto a better charger. oddbudman
Wednesday, 30 September 2009 - 05:24
Current Limiting Diode (CLD)
36V at 3A = 108W This project certainly is not simple, the fact that you are suggesting using current limiting diodes (and from what I can gather a non-isolated approach) for this...
Wednesday, 30 September 2009 - 01:33
Geek p0rn!
Take it off, take it off. Top find. oddbudman
Saturday, 26 September 2009 - 01:45
My first real project
Some notes worth reading about automotive environment
Friday, 25 September 2009 - 00:50
My first real project
Can you better explain your concept for Q1 and Q2? I think you also should label your I/Os on the left with more meaningful names then WIRE_UP_X - it is hard to read. Watch power...
Thursday, 24 September 2009 - 05:32
How to measure nano/micro-amps to 500mA without crashing?
Can you measure the high and or low current at a different parts on the circuit? I think you are going to struggle trying to get a cheap solution over the dynamic range required...
Wednesday, 23 September 2009 - 01:12