Post Created date
Thermals on SMD mechanical support?
I'd suggest follow the datasheet's instructions. Is it going in an enclosure? You should probably consider what forces will be applied to the connector and the support it will...
Thursday, 27 October 2011 - 05:37
Prototying Methodology
This is perhaps higher level, but might as well add it to this thread. From an Agilent Appnote. oddbudman
Tuesday, 11 October 2011 - 10:32
Simple AC detect circuit
Not so keen on the 20k @ 220V advice on that link. oddbudman
Thursday, 21 July 2011 - 10:23
Y/X EMI caps and a case for a DIY power supply
Your using a low frequency transformer from mains to low voltage dc. You probably don't need any X or Y caps for this application provided you follow good grounding, decoupling...
Thursday, 17 March 2011 - 04:51
Inductive load switching with FET
Can you just use a higher voltage rated FET? (including a snubber would still be recommended) oddbudman
Monday, 24 January 2011 - 12:16
EMI reality check needed
toalan, Why bring 2 products to market? Won't this mean 2 lots of approval testing? 2 products to manage in production, 2 products to service once in the market ? Your...
Wednesday, 19 January 2011 - 00:56
EMI reality check needed
Tolan, can you explain your system a little more? Like input voltage/ power (PF?). Output voltages/power. Enclosure? Product Class? Isolation? oddbudman
Tuesday, 18 January 2011 - 11:34
DC step-up converter - any experience?
MC34063? Might not like working at
Monday, 17 January 2011 - 12:56
Led driver
Series / Parallel with resistors. Switch them using a low side switch. Pwm with the switch for dimming.. Use the 12V source. oddbudman
Thursday, 13 January 2011 - 00:44
Please give your opinion on my circuit/PCB Layout
Some notes: - your power tracks are too thin - for the through hole components is a good idea to fatten up the tracks when they run into the pad, this will make where the track...
Friday, 10 December 2010 - 13:56
Transistor basics: Load on collector or emitter?
rhoaste, It might be worth getting a copy of LTSpice and looking at some of its example circuits. There is info on the website sticky area on this software I believe. IMHO, Common...
Friday, 19 November 2010 - 02:38
Isolation recommendation
Ali, The tlp521 looks like a much much slower opto then the 6n137. Have you checked the serial speed from the meter ic? oddbudman
Thursday, 7 October 2010 - 14:09

Pages