Type in the full discussion title or a part of it.
Discussion Title Created date
Prototype PCB Manufacturers in Australia
Hey all, I'm looking for an Australian PCB manufacturer that specialises in fast turn around high quality prototype pcbs. Currently I have to get a panel done at a time and this...
Friday, 13 August 2004 - 01:23
Design for Manufacture - Guides?
Afternoon all. I'm currently in the process of designing a new board that is to be mass produced (>1k production run) and I was wondering if anyone out there had some good...
Friday, 16 July 2004 - 02:19
EMC NOP Recomendation
Just designing a product for EMC testing ATM and came across this... Quote:"A bus access to a non-existent address returns the data #ff, provided there is a passive pullup on the...
Wednesday, 30 June 2004 - 04:58
OT- Overvoltage / Overcurrent Protection of Serial Line
I'm currently in the process of developing a protected 12v- 250mA (current limited) DC supply. The problem is I need to design the supply so that if 240vac (RMS) is connected...
Wednesday, 23 June 2004 - 06:15
Batch programming ATMEGA8 with 8MHz Internal RC
Hey all, i have to program a batch of ATMEGA8s that are going to use their internal RC oscillator. I have worked out how to automate the fuse setting programming but can't see a...
Monday, 7 June 2004 - 10:55
OT- EMC / CE / Circuit Consultant - (EN55022) (Australia)
Afternoon fellow AVR freaks. Currently I am in the design stage of a project. The project is a simple digital lighting controller that sends a 1200bps biphase 12v@250ma (...
Wednesday, 19 May 2004 - 02:55
OT - Overvoltage protection on Serial Tx Circuit
Hey there, currently I am working on a simple digital lighting controller to control some fadable fluros. The circuit works as is (switches 12v @ 250mA regulated), but i would...
Tuesday, 4 May 2004 - 01:57
Linux Terminal Program GTK Term
For all those linux users out there keen to do serial I/O and sick of the rather dated minicom, give GTKterm a try. I have been using it lately and whilst it is rather simplistic...
Monday, 5 April 2004 - 23:12
OT - Joypad switch for interfacing to AVR
Hey there all. Currently I am developing an application that needs a simple digital joypad control. I'm looking for where I can find the joypad mechanism - i've looked at Farnell...
Wednesday, 17 March 2004 - 22:36
OT - See if you can break this code :)
Hey all. Currently i am in the process of reverse engineering a serial stream. Basically the stream sent is always 7 bytes long. The 1st Byte is like a header. the 3rd last and...
Tuesday, 9 March 2004 - 06:55
ATMEGA8MEGA8 Debugging GDB or AVRSTUDIO?
hey there people. currently i am keen to do some debugging with the ATMEGA8 and was wondering what would be the best way to go about it. I do my programming in C so a c level...
Friday, 20 February 2004 - 03:17
adding c files to example makefile
Hey there all. I'm having some problems with using Makefiles. Despite my attempts to comprehend the manual I am still confused. Basically i just want to modify the example...
Friday, 6 February 2004 - 03:25

Pages