Post Created date
At89c8515 SPI
I use AVRLIB from http://hubbard.engr.scu.edu/embe... and my programm for DACs.
Tuesday, 13 April 2004 - 16:27
Atmel 256k Serial EEPROM Limit Recomendation ?
There are not so big capasity MC in soic8. See at45 Alexander
Monday, 12 April 2004 - 15:23
Can I use Half H-Bridge for this program ?
H-Bridges Most loads such as motors need to be operated in both forward and reverse. This requirement often leads to a circuit layout known as an H-Bridge. An H-Bridge has 4...
Monday, 12 April 2004 - 13:55
Atmel AT45xx DataFlash
I use a single 300 Ohm restor between M128 MISO & SO of DataFlash and two external pullup (to 3v) resistor 300 Ohm for CS and RDY in EVB ASmegaPLD supplyed by Argussoft Co...
Monday, 12 April 2004 - 12:52
generate serial RS232 data format
1 . Multiplexor 2. resistive devider 1/2,5 3. AD623 instrumental amplifier with +5 -5v supplies 4. 2.5v to vref pin AD623 to bias in positive zone 5. m128 Alexander
Thursday, 8 April 2004 - 16:41
Help : sending to serial port
To see letter I'm using Terminal 1.9 Alexander
Wednesday, 7 April 2004 - 16:59
Help : sending to serial port
Try to use slightly modified new P.Fleury programm (+printf) Alexander
Wednesday, 7 April 2004 - 16:47
Opto Isolated ADC input needed for mega128
I am using AD7741 V to F converter, Traco TMA0505s and 6n137 optocoupler. Alexander.
Wednesday, 7 April 2004 - 16:33
Opto Isolated ADC input needed for mega128
I am using AD7741 V to F converter, Traco TMA0505s and 6n137 optocoupler. Alexander.
Wednesday, 7 April 2004 - 16:32
clarity on vfprintf function
``Standard IO facilities'' are in the avr-libc Manual(WinAVR) One example is i n /winAVR/examples/twitest/twitest.c or .... int uart_putchar(char c) { if (c == '\n')...
Wednesday, 31 March 2004 - 15:29

Pages