Type in the full discussion title or a part of it.
Discussion Title Created date
LCD lib without R/W
I have an existing project that I used BASCOM to program a 2313. BASCOM doesn't use R/W and sure enough the PWB has the LCD R/W permanently tied to ground. I am trying to get the...
Wednesday, 2 July 2008 - 01:47
Measuring Supply Rails with ADC
I have a rechargeable battery operated device that I want to switch off certain function when the battery gets too low. I am thinking the internal ADC with the internal Ref would...
Wednesday, 16 April 2008 - 07:40
RC Kill Switch
Inspired by ZiPo's RC Brake lights on the AVR Forum, I have been playing around with a Tiny13 and attempting to create a small kill switch for my Gas Boat. this is what I have so...
Monday, 14 April 2008 - 12:52
3ch LED DMX Dimmer
I recently listed my 3ch LED DMX Dimmerproject. 8) I have been thinking about the user interface. Currently it uses 3 DMX channels to control the LEDS. that means moving three...
Sunday, 3 June 2007 - 12:56
Butterfly & SD memory and 1wire Temp sensor
I need a device that will record temp(and may be other signals too) over a period of time, I have always wanted to get a SD/MMC memory card i/f working so I am wondering if this...
Monday, 29 January 2007 - 21:30
OT - LED driver
I am wanting to drive a string of series LEDs. I want to switch 8 series LEDs, Vf of LEDs are 2 to 3.6 volts dependant on colour. I seem to remember that constant current source/...
Wednesday, 3 January 2007 - 00:26
Timer - simulator attempt
I am trying to get hte following code to work with the simulator. It is a first on two counts, simple timer interrupt and simulator, so heaps of ares to be wrong!!! The ideal to...
Wednesday, 28 June 2006 - 04:27
Code reduction - if statements
My project on hte 8Ch DMX RX switch drives 8 Fets via optocoupleers. It works a treat. But the heart of the code is 9 or so if statements as below. The ISR for the DMX simply...
Tuesday, 18 April 2006 - 06:42
USART on Tiny2313 vs MEGA32L
Hi The following code works swell on a MEGA32L. However it wont run a TINY2313. :shock: Optimisation changes in complier doesn't affect result. Using GCC in Studio 4.12. AVR...
Thursday, 2 March 2006 - 11:03
DMX Tx test module
I am developing a DMX Rx module. I thought it would be good to have a TX module that gave a known refernece signal ( it also enabled me to check the baud rate) Thus the following...
Monday, 30 January 2006 - 21:42
Byte value to LCD
I am using Peter Fleury 's LCD library. I want to send the value a byte to the LCD, ie 0xFFF needs to be displayed as "4095" The library doesn't have a PrintF function. Itoa()...
Saturday, 21 January 2006 - 09:18
Problems with DMX code
I am trying my hand a DMX RX Below is my code. I am using a TINY2313. My INIT LED turns ON as expected. However the TRIG LED does not come on. It would a paear the Interupt is...
Monday, 16 January 2006 - 11:49

Pages