Post Created date
STK500 and 1K Pullup on Reset
clawson wrote: jbwiden wrote: I never really considered using the Arduino for anything other than easing the hardware setup for projects. How does use of the bootloader to program...
Monday, 3 April 2017 - 17:36
STK500 and 1K Pullup on Reset
david.prentice wrote: But seriously. If God gave you a USB cable and a bootloader, why would anyone want to use ISP?   Well, maybe it is time for me to embrace it. I never...
Monday, 3 April 2017 - 08:32
STK500 and 1K Pullup on Reset
> jbwiden seems to be using an STK500 for ISP programming, and that fails. Correct.   I don't use the bootloader, I assume it would be fine but I don't currently...
Monday, 3 April 2017 - 06:03
STK500 and 1K Pullup on Reset
Measured and then looked at the schematic and the official design is 1K pullup.   [Warning PDF download]   I actually have some other...
Monday, 3 April 2017 - 00:23
Atmega162 -link- Matlab
Unless I am mistaken the control system toolbox, if you don't already have it, cost a good bit of money. Try >>help serial in the command window it will show you how to do it. (I...
Thursday, 5 June 2008 - 20:20
Skippy MP3 Streaming
what fuctions does the alarm clock have and what more will you add? JW
Monday, 2 June 2008 - 12:10
ICC-AVR stack overflow function
I belive I found the error, the function _StackOverflowed() has to have a parameter. therfore it needs to be _StackOverflowed(char n){...} and then n will show HW vs SW overflow
Sunday, 18 May 2008 - 23:36
Memory storage device selection
Guillem, You refer to both a file and a record are these two things different? The data collection will be for one continuous period of time (at most 6 hours)and then will be...
Thursday, 24 April 2008 - 10:08
Memory storage device selection
Well that is one plus for EEPROM. The board will be running at 5 volts so I might as well use the EEPROM to avoid interfacing different logic levels. The device is going to be...
Thursday, 24 April 2008 - 08:47
Memory storage device selection
sorry about posting in the wrong forum, I will pay closer attention next time. The processor is going to be the Atmega88. There are going to be a few other sources of data that...
Thursday, 24 April 2008 - 04:38
Memory storage device selection
Will the information on using a pull up vs. pull down and the resistance value be in the AVR data sheet? -Josh
Thursday, 24 April 2008 - 04:09
ATTiny45 ADC Clock
It most certainly is in the data sheet, look at the ADCSRA register -Josh
Wednesday, 23 April 2008 - 03:30