Type in the full discussion title or a part of it.
Discussion Title Created date
ADC Stk600 2560
Ive set the boards ADC ref to 3V. Ive verified with a scope that the AREF is getting 3V. Ive verified that ADC channel 0 is getting either ground or 3V. neither makes a difference...
Thursday, 22 December 2011 - 15:39
EMC, CE product testing.
Im looking at designing an automotive product with several stepper motors connected to a control unit in the console. If selling this as an aftermarket product (particularily in...
Friday, 30 September 2011 - 09:12
ESD and Transient Protection
I have a 400KHz serial bus going through a connector to an external module that plugs into the main board i.e. Im trying to tie down what and how I should be protecting both...
Sunday, 21 September 2008 - 17:24
SKT600 Got one...
..but whats the input voltage? Id rather not blow it up guessing. It would have been nice if Atmel had included a few simple bits of information :roll:
Thursday, 3 April 2008 - 22:38
I was thinking of buying this logic analyser...
http://www.pctestinstruments.com/ Any thoughts? I'm in the UK and need something to debug I2C, SPI, RS232 or a data bus on another project. Looks pretty good and I’ve downloaded...
Wednesday, 11 July 2007 - 13:02
AVR JTAG MK11
Sorry to keep harping on about this but has anyone buying from the UK managed to find this device cheaper then £180? http://server5.gs-shop.de/200/cg... Thanks :)
Tuesday, 13 March 2007 - 23:35
JTAG Programmer
There are so many JTAG programmers and coming from the PIC I was wondering if anyone had any views which is best to go for. Im interested in playing with the Atmel AVR and ARM MCU...
Thursday, 8 March 2007 - 14:22
24v Interfacing...
Im building a board at the moment to interface to several low power (
Thursday, 26 October 2006 - 07:54
Clean 24V line
I have a control system (PIC display driver etc 5V) for a 24V Motor. I want to make sure that any noise from the motor circuit doesnt affect anything else. If I have a 5V...
Saturday, 16 September 2006 - 11:44
Oscilloscope
I’ve been doing and will be doing lots of contract work where I need a scope. I’ve looked on ebay, and the various other places but don’t want to spend a couple of hundred £'s on...
Thursday, 3 August 2006 - 11:17
12x Seven Segment Displays
I have a project that requires 12 of these (It has to be done this way as I would otherwise use a LCD display). Anyway; I was wondering if anyone had used this many in a project...
Thursday, 27 July 2006 - 10:35
To many thoughts, brain going to explode...
Hi all, I would like some general guidance (if possible). Please excuse the length of this post… Background: I have recently been dropped in the deep end at work. The old embedded...
Wednesday, 1 February 2006 - 22:37