Post Created date
EIA-/RS-485 Interface on AVR32-Linux
Just to verify before we do the same work twice: You're working on doing this ( "the right way",...
Friday, 21 March 2008 - 23:37
nmap for AVR32 Linux
Can you compile other programs for that board (does your toolchain work?) Did you try version 4.20 of nmap? what are your ulibc-settings? do you network-stuff disabled there...
Tuesday, 18 March 2008 - 18:54
EIA-/RS-485 Interface on AVR32-Linux
Well, I have one here (SN75176BP, datasheet: ) and it's an 5V one. Do you have any suggestions for a 3.3V one? On page 4 of the datasheet it...
Tuesday, 18 March 2008 - 18:40
EIA-/RS-485 Interface on AVR32-Linux
Hello, I'm interested in that "RS-485-patch-thingy", too so please tell us when you've got news. By the way: are the USART-pins on the expension-headers 5V-safe or do I risk to...
Monday, 17 March 2008 - 19:00
Why 0x8000 and 0x0008
You might find that usefule: It's general, not about the LEDs onboard but it might help to get the meaning.
Monday, 20 August 2007 - 12:03
NGW GPIO changes as of 2.6.22
Ok, I've got a button working now as I want it, /dev/gpio-devices are actually quite nice for what I need them but I'll have a look at the gpio_keys, too. Thanks for the hint.
Saturday, 18 August 2007 - 09:13
NGW GPIO changes as of 2.6.22
Ok, I'm on 2.6.22.atmel3 here, my LEDs do work perfectly (I can make them all beat like a heart, or control all manually). Now: How do I use the GPIO-pins to read buttons/switches...
Friday, 17 August 2007 - 15:28
How to test GPIO with NGW100
One question about that: Do the tutorials in the wiki (espacially that one "NGW100 Switched Input") work with linux-2.6.22.atmel3 where the GPIO-handling has changed?
Friday, 17 August 2007 - 15:22
NGW Kernel compile
What about USART2? I know I said I had some filesystem-corruption with it but it could have been something else, too (I tried several kernel-options that time). You might give...
Wednesday, 15 August 2007 - 13:48
NGW Kernel compile
I2C and TWI are fully compatible AFAIK. You might get USART0 working, if nothing else tries to get these pins but there's still one problem: I2C is used to connect the CPU (AP7000...
Tuesday, 14 August 2007 - 14:15
NGW Kernel compile
My setup.c looks like: Quote:... void __init setup_board(void) { /* USART 0 pins are used by I2C !!! */ at32_map_usart(1, 0); /* USART 1: /dev/ttyS0, DB9 */ //at32_map_usart(2, 1...
Sunday, 12 August 2007 - 03:54
nmap for AVR32 Linux
Indeed, you'll need libpcap for that. Here's what I did (using libpcap 0.8.1): Open "configure" with your favorite editor and goto line 1957 ("ac_cv_linux_vers=...") and change to...
Sunday, 12 August 2007 - 02:53