Post Created date
ATSAMD10D13AS alternating GPIO INPUT/OUTPUT
I think I answered my question in another post, the code change quite a bit so I will just link to that is anyone is having the same issue. https://community.atmel.com/foru...
Monday, 8 August 2022 - 07:29
ATSAMD10D13AS I2C with arduino mkr gsm 1400
OK I figured it out PIN 16 and 15 share the PMUX register so setting the counter to pin 16 somehow blocks pin 15 from being changed to input. If I disable TCC0 before changing pin...
Monday, 8 August 2022 - 07:27
ATSAMD10D13AS alternating GPIO INPUT/OUTPUT
No I would say, why do you think so Yeah it isn't I forgot that the pins are defined as unsigned long. It's hard to ignore this, is it still true? Can you really run it in...
Monday, 14 March 2022 - 09:01
ATSAMD10D13AS alternating GPIO INPUT/OUTPUT
Thanks for the response, I tried to change it but the problem remains. To be honest I'm not sure what the building process is I didn't change anything in atmel studio and I'm...
Friday, 11 March 2022 - 08:31
GPIO state after entering standby mode(ATSAMD10D13AS)
Thanks, for pointing it out that was a dumb mistake. One more question I turn on my PWM like this: PM->APBCMASK.reg |= PM_APBCMASK_TCC0; // Enables the APB clock inside Pwr...
Friday, 4 March 2022 - 14:39
SAMD09(09D – 24-pin QFN) pin types
Thanks for the response, images do indeed make everything more clear, I'll keep that in mind for future posts. So if I understand the table correctly pins PA02-PA07 and PA10-...
Friday, 7 January 2022 - 11:06
ATSAMD21G18A One wire library
Ok so I got a scope and an arduino Uno to test the sensor. When I use arduino the code works and I have the following data on the scope (I tried uploading a picture but I can't...
Wednesday, 22 September 2021 - 09:01
I2C problems when sending and reading data (ATSAMD21G18A)
If annyone is interested I used the code from the arduino core and changed it slightly, after that everything is working as intended. 
Wednesday, 22 September 2021 - 08:46
ATSAMD21G18A One wire library
Ok so I got a bit of help over on the other forum however I'm still doing something wrong.    This is the original code I'm trying to change.  void OneWire::begin(...
Thursday, 16 September 2021 - 11:10
ATSAMD21G18A One wire library
I haven't but now I will :D thanks for the info.
Tuesday, 14 September 2021 - 13:35
ATSAMD21G18A One wire library
I meant this library I tried to use it as a base and translate it to code compatible with SAMD21. Is something like that even possible without rewritting the whole thing...
Tuesday, 14 September 2021 - 12:54
ATSAMD21G18A One wire library
Thanks for the detailed response, i really appreciate the resources you provided, hopefully that will be enough. 
Tuesday, 14 September 2021 - 12:48

Pages