Post Created date
Come Join Us (MPLAB Now Supports AVRs)
I recently finished a project using MPLAB / MCC for the ATtiny817, and it never crossed my mind that there was anything strange about compiling for an AVR processor in MPLAB....
Friday, 8 April 2022 - 04:34
Why is RTC.CNT getting reset?
Right.  The bit I missed in the document was:  [The RTC] will generate ... an overflow interrupt and/or event at the first count after the counter value equals the...
Sunday, 13 March 2022 - 17:34
Should I use Arduino or ASF4...
should we infer that you're not comfortable/familiar with Arduino ? Let's just say it took me a good while to figure out that "Arduino Pin 10" maps to GPIO PB14 on the SAMD21...
Friday, 5 November 2021 - 18:44
semi-bricked (?) XMEGA A1U Xplained Pro
@kutch Good catch: the driver does show up under USB Controllers, but with a "danger" triangle ("This device cannot start.  (Code 10)  Insufficient system resources to...
Tuesday, 7 September 2021 - 03:38
Configure AS7 to download .bin rather than .elf?
@lajon: Let the bootloader flash the app and debug without flashing anything? Sensible idea, but this bootloader is a bit non-standard in that it (only) reads files from the SD...
Thursday, 2 September 2021 - 16:10
Configure AS7 to download .bin rather than .elf?
First, an apology: I mis-filed this note.  It really belongs under the Atmel Studio (ARM Related) forum, but I think the question still applies:   When debugging your...
Thursday, 2 September 2021 - 05:00
AtmetStart.env_conf already exists in the zip archive
... and it just bit me again.  Am I the only one to get this message?  
Tuesday, 31 August 2021 - 03:52
Detecting all keyboard events via the EDBG serial port?
Addendum: I realize that I'm not thinking this through very clearly.  The processor has a USART that expects to receive a byte when a key is pressed and nothing more.  ...
Friday, 2 July 2021 - 14:25
External oscillator in START not selected?
Jim:   OSC_XOSCEN_bp is for the OSCILLATOR, not the clock the CPU or peripherals use. That's solid reasoning, but -- to indulge in a bit of pedantry -- START certainly...
Wednesday, 9 June 2021 - 20:46
External oscillator in START not selected?
(and yes, ^C/^V works to paste images.  thanks for the tip!)  
Wednesday, 9 June 2021 - 18:37
External oscillator in START not selected?
Solved, after a fashion.  I noticed that on START's Dashboard panel, there were additional OSC settings (see attached).  Why the setting for OSC_XOSCEN_bp isn't on the...
Wednesday, 9 June 2021 - 18:35
External oscillator in START not selected?
(Created a new account so I could at least log in!)   Dear moderator: I still can't add media -- is there a known workaround to "You are not authorized to access this page"...
Wednesday, 9 June 2021 - 18:05