Type in the full discussion title or a part of it.
Discussion Title Created date
Why does Timer0 draw 2.5x of Timer1?
Tiny24 datasheet; excerpts below.  8-bit timer0 draws over twice the current of the 16-bit timer1 that has the full complement of typical AVR8 timer1 modes.  I thought...
Friday, 1 July 2016 - 14:34
Preprogrammed AVRs -- cost?
An upcoming app has volumes in five figures.   It has been some years since I worked on one of these "quantity" apps.  Anyone have recent experience on AVR8 price break...
Wednesday, 29 June 2016 - 15:31
Need a printer on my AVR app...
An app requires adding a hard-copy capability.  Think of a "batch ticket" that gives date/time/amount/moon phase/etc.   AVR has an available USART port, that we can turn...
Thursday, 21 April 2016 - 16:12
Select AVR8 with 4 diff. ADC pairs and USART
I'd think I've seen as many AVR8 models as nearly anyone.  But this one has me stumped.   A redesign of sorts is needed on one of our industrial control modules, as...
Tuesday, 19 April 2016 - 20:46
For joeymorin: AVR8 timers, fast PWM, COMxy = 01
Hey, joey--Are you still on your hot streak?   In https://www.avrfreaks.net/comment... we were discussing CTC and FOC and natural compare matches.   Then in https://www....
Wednesday, 23 December 2015 - 20:02
Feedback on Mega88PB family?
Has anyone applied the Mega88PB family "in the field"?  The ATmega168PB has been available for a few months, and I see that now there is stock of ATmega88PB and ATmega48PB at...
Wednesday, 14 October 2015 - 20:37
Favourite thermocouple interface?
The forum search seems to be singularly broken today, and the most recent thermocouple discussion I can find is 2011 so I'll ask again...   Upcoming app may well use a...
Monday, 21 September 2015 - 19:19
MPCM slave sample code?
Does anyone have a fragment of Xmega MPCM slave sample code? 20.13.1 Using multiprocessor communication mode The following procedure should be used to exchange data in...
Friday, 18 September 2015 - 19:47
Where are Xplained demo program sources?
Grrr--I give up.   XMEGA-A3BU Xplained kit.  Works fine.  Connects fine to JTAGICE3.   Now I want to start doing stuff.  So, I want to start by examining...
Thursday, 17 September 2015 - 18:56
3-Phase Test Rig, with step-up
Not too much "electronics" here, more "electrics" ... ;)   We need to make a test fixture for 3-phase motors that will be run no load.  So the current draw will be a few...
Wednesday, 19 August 2015 - 14:58
RS485 transceiver, 3.xV operation
We use a lot of RS485 in our industrial controller operations.  Most apps use 8-pin SOIC, 5V, Vcc/Gnd/TxD/RxD/TE/~RE/A/B.  They cost about a buck.   I'm working on...
Wednesday, 12 August 2015 - 21:01
AVR8 + Ethernet => GridConnect ATC-1000 ?
A line of our controllers connects to the real world with   AVR8 USART -- FTDI -- USB -- (typically) Windows laptop -- monitor/control app   This was enhanced for "...
Thursday, 2 July 2015 - 15:20

Pages