| Discussion Title | Created date |
|---|---|
|
Is SAME70 lacking UART HW-FIFO? From the data-sheet for SAME70x21, UART seems to be lacking HW-FIFO, yet DMA is supported. From the UART driver code, it's clear that buffers are used but it's unclear if... |
Thursday, 15 October 2020 - 09:15 |
|
SW equivalent to ERASE pin Hi, Is it possible to do the SW equivalency to setting the ERASE-pin? I.e. reset flash and force factory bootloader. Primary need is not clearing flash but... |
Monday, 28 September 2020 - 07:14 |
|
SAME70 flash erase failure Using OpenOCD to erase the flash, the following sometimes occurs: INFO: Erase bank 0 INFO: Check erased bank 0 sector 0..4 successfully checked erase state ... |
Tuesday, 25 August 2020 - 09:35 |
|
SAME70N21: PD7 & 7 pinned as driving high level output On J variant of SAME70, used as PIO PD7 & PD8 are not controllable and are furthermore both active high level. Using debugger on each of these lines, voltage... |
Wednesday, 12 August 2020 - 13:15 |