Type in the full discussion title or a part of it.
Discussion Title Created date
convert 0.2V to 3V
First I have no real need for this at the moment but had some thoughts about harvesting some power.   So if I have 1mA 0.2V from a temperature difference, (in general 24...
Friday, 3 February 2017 - 10:36
No C code in .lss file
First I'm not sure if this should be under studio related stuff , but since the .lss is made by the compiler I placed it here (feel free to move).   For a on going project 5...
Wednesday, 1 February 2017 - 22:57
C formatter
I have to clean up in some C mess!   What is the best tool (on windows), to format C code? (it has to have a setup for formatting! I don't always agree with default settings...
Monday, 30 January 2017 - 13:29
Solved: WARNING Atmel make fake 328P
Sorry I have to write it this way, but Atmel will start making 328P with the same problems as 328PB!   The real problem is the full swing crystal osc. don't work, so people...
Monday, 14 November 2016 - 09:23
Make a 2A pulse from 500mA
A place where I work, have just got some 12V 5ohm solenoids, the problem is that I only can give about 700mA (and the PSU only 1A , and max 190% for a short time), so I can't just...
Tuesday, 31 May 2016 - 09:41
which Bluetooth parts to use?
I have to make a bluetooth system that control a servomotor (perhaps stepper motor), from a smartphone, what is the best/cheapest way to do it?   Today I use BLE121 modules...
Friday, 5 February 2016 - 13:16
Error in mega328PB datasheet ?! Test
As we all know Atmel always have errors in the datasheets, but this one I guess needs a warning. In the pdf file of the AVR instructionset is very unclear of which (and directly...
Tuesday, 5 January 2016 - 13:53
New mega324 warning.
Just fast info.   There will come a new mega324 called mega324PB, this is a new design, and will have same problem than some new 328 (and similar),  Atmel call it a 20...
Monday, 4 January 2016 - 12:06
need 5.5mm Tactile Switch or 0.5 mm spacer
For an existing project I need a tad higher tactile switch. Today I use a 5.0mm high switch like this : http://www.digikey.com/product-d...   but it needs to be 5.5mm, (+-0....
Tuesday, 15 December 2015 - 22:48
why does this give a warnings
This code works fine but give 3 warnings why?  it say assignment from incompatible pointer type   and which typecast to use or type of pointer to use (I know that this...
Tuesday, 8 December 2015 - 14:42
Max temp for bluetooth module? (BLE121)
I'm making some tests to see if my controller works when warm.   And I don't have any problems with the AVR's, and my display works fine to about the spec of 70 C. But My...
Monday, 16 November 2015 - 09:59
FORTH
Just a small check Are there any here that use forth for AVR? and which ?
Thursday, 22 October 2015 - 12:43

Pages