Post Created date
Sample projects for Curiosity Nano ATtiny1607
kristof_mulier wrote: I bought the ATtiny1607 Curiosity Nano board   I'm looking for a simple blinky project.    #define F_CPU 3333333 #include <avr/io.h> #...
Tuesday, 18 January 2022 - 06:48
ATTiny85 Variable Clock with Two Complementary Output ???
The TCD is the dedicated timer for such things.   https://ww1.microchip.com/downlo...        
Sunday, 9 January 2022 - 08:19
Using 16bit timer Attiny841
Louis123 wrote: If I use the 16mhz crystal oscillators option must I use the 5v option or can I use 3v supply?      
Sunday, 12 December 2021 - 08:15
Using curiosity nano nEDBG for other AVRs
    A promise is a promise.  
Wednesday, 1 December 2021 - 11:58
Can anyone show me an example for attiny202 pit routine
I also have a question about PIT. Why is the first blink period after power-on always 1/2 of the programmed PIT period, i.e. 4s instead of 8s, 8s instead of 16s etc.? What am I...
Tuesday, 16 November 2021 - 18:36
Gated (Burst) PWM on M4809
avrcandies wrote: That's for a "raw" piezo...many can be run from an external unipolar drive.    I meant simple piezo buzzers - without builit-in oscillator,...
Sunday, 14 November 2021 - 05:45
Gated (Burst) PWM on M4809
Direct driving of small piezo buzzers  
Saturday, 13 November 2021 - 08:58
atmega328p high power consumption in sleep mode
muelli0815 wrote:  Could the mega be faulty?    I would check this with a minimal code.  
Thursday, 28 October 2021 - 17:18
ATTiny 85 and in circuit programing of RSTDISBL
brebisson wrote: I want to use PB5 in my design as an output..  You may use PB5 as an output. (Datasheet: "The reset pin can also be used as a (weak) I/O pin.")...
Friday, 8 October 2021 - 07:05
ATTINY441 PWM problem
radiotehnik777 wrote:   TOCPMCOE |= (1<<TOCC0OE); // Enable output compare channel on port PA2 (TOCC1)   TOCC0OE means TOCC0 Output Enable, not TOCC1
Thursday, 7 October 2021 - 19:39
Atmega128 running red diods on button pressed.
jgmdesign wrote: Babaika wrote:As our teacher said, this reduces the life of the controller, What the F***?    Because there are three types of memory on the chip, but...
Tuesday, 5 October 2021 - 14:04
OK to have crystal oscillator on OSC pins when configured for internal osc?
davethomaspilot wrote: Do I need to remove the oscillator from the OSC pins if I want to run with an internal oscillator?  I could not find any corresponding warning in the...
Sunday, 3 October 2021 - 16:08

Pages