Type in the full discussion title or a part of it.
Discussion Title Created date
Gcc bug? missing castu.b in gcc 4.2.2-atmel.1.0.8
hi everybody. I've been trying the latest buildroot from http://atmel.no/buildroot. All of the previous apps worked except from one. Looking for the problematic line or a possible...
Sunday, 25 May 2008 - 20:43
PLL clock, changing values in U-Boot
(I think this message belongs here since it's about avr32 hardware) I'm trying to change PLL frequency in AP7000 (ngw100) without re-flashing U-Boot. I did this: setenv...
Tuesday, 13 May 2008 - 21:49
NGW100 SD card write speed
hi everybody again. I think I saw a post about this already, but I couldn't find it with google on avrfreaks.net :( However...here is the problem: I'm trying to record 96khz...
Sunday, 20 April 2008 - 23:21
AT90CAN RTR response
hi everybody again. I have a question about the CAN module in AT90CAN devices. I want to answer to a RTR request which is sent by a AT91SAM7X (ARM7 from atmel). That uP seems to...
Friday, 28 March 2008 - 00:05
A/D, input overvoltage
hi everybody again, I'm dealing with a design here, where a CAN AVR is powered from 5V, and I have to measure signals varying from 0V to 6V. I don't need to measure once it is...
Saturday, 23 February 2008 - 23:39
reducing power consumption - PHY powerdown?
Hi everyone again, here I am triying to reduce current consumption in NGW100. I'm planning to do an audio player prototype, and since most of the time the eth ports are not being...
Wednesday, 13 February 2008 - 02:26
compiling bootstrap gcc for gcc-4.2.1-atmel.1.0.3
Hi everybody, I'm having problems compiling the latest gcc from atmel (avr32-gcc-4.2.1-atmel.1.0.3.tar.gz), just after make and make install with binutils. at the end of doing...
Friday, 14 December 2007 - 18:20
replacing 20MHz crystal on NGW100
hi all.. has anybody tried replacing the 20MHz crystal on the NGW100 by, for instance, a 24.576MHz one. I want to do this to get standard audio sampling rates on the DAC. It doesn...
Saturday, 1 December 2007 - 21:14
Article - Interfacing a character display
Hi everyone.. here there is a little 'article' I wrote, based on a LCD character display, avr32, linux and the NGW100. I thought it's time to give back something to the community...
Friday, 23 November 2007 - 04:14
access I/O ports from user space, not GPIO
hi everyone again. I was wondering if it was possible to read and write register values to control AVR32's functionalities from user space. I already made kernel modules to do...
Wednesday, 21 November 2007 - 20:24
NGW100: modprobe only works with serial console
Hi everybody.. here I go with my first post on the AVR32: I've been using some modules, specially the at32_abdac to make use of the integrated DAC. I already modified setup.c in...
Thursday, 8 November 2007 - 15:34
tiny26 just about to brownout but hangs
Hi everyone again. Here I am with a little problem. I'm using a tiny26 for a battery charger. It's powered on 5V though a HT7550 reg., brown out enabled and watchdog running. It...
Wednesday, 17 October 2007 - 04:58

Pages