Post Created date
How to use char **arr
AndreyT wrote: The matter of doing it "in 2 steps" has arisen in connection with attempts to put these strings in flash memory, which has no direct relevance to your original...
Tuesday, 30 June 2020 - 15:33
How to use char **arr
Program memory constants are a weak area of AVR. The obvious didn't work compile: error: initializer element is not computable at load time const __flash char *const __flash...
Monday, 29 June 2020 - 22:06
Store UART Data in Char Array and display to PC
I'll vote for dispensing with the state machine idea here.   Command processors tend to grow & grow as projects near completion and whilst extending state machines is...
Monday, 29 June 2020 - 14:22
Rotary Encoders Occasionally reading in reverse
I was surprised that no-one posted a state diagram - so tried to find one. Google was not my friend.   The best I could find was this fully featured diagram: Credit where...
Sunday, 28 June 2020 - 20:59
Pin change interrupt is unreliable with certain input signals
mzinner wrote: As I understand it, - the initial latch is transparent while CLK is HIGH, and keeps the state it had on the falling edge of CLK while CLK is low - the signal that...
Sunday, 28 June 2020 - 20:18
script ".stim" for interruptions with Studio7
abra.xx wrote:For example, in "Debug" + "I / O" That isn't anything to do with the Simulator that's a Debugger View.   abra.xx wrote: it was possible to display several...
Sunday, 28 June 2020 - 13:53
Store UART Data in Char Array and display to PC
I managed to simulate some of your code and found something to explain some of what you're seeing.   You perform an itoa() constantly inside your while loop. itoa is...
Sunday, 28 June 2020 - 12:20
script ".stim" for interruptions with Studio7
abra.xx wrote:The simulation with Studio 4 was much easier I stand to be corrected but from a user's point-of-view (I.e. Internal interfaces excepted); Simulator in Atmel Studio7...
Sunday, 28 June 2020 - 10:02
(Very) slow _delay_ms() w/ XC8 and ATmega4809
tunari wrote:Here's the "funny part"... Document "MPLAB® XC8 C Compiler User’s Guide for AVR® MCU" (DS50002750C), page 133, section 7.5.1 states: "The macro F_CPU should be...
Sunday, 28 June 2020 - 09:56
script ".stim" for interruptions with Studio7
Here's a Post I wrote on this a little while ago: Stimulus File Description/Definiton
Saturday, 27 June 2020 - 20:40
Rotary Encoders Occasionally reading in reverse
I'll question this line: encoderPortStates|=0b00001101; //we want to set bit 1.The effect of the line sets more bits than your commented intention.  
Saturday, 27 June 2020 - 11:29
RonWesley posts
awneil wrote: Didn't spot any links, though Neither did I - Perhaps they were invisible to muggles.  
Saturday, 27 June 2020 - 09:39