Post Created date
The system cannot find the drive specified
calwson:   I noticed your logo gif, how about the work flow ? Do you have a tutorial about it ?
Monday, 20 July 2020 - 04:06
The system cannot find the drive specified
I copied address into it, then:
Monday, 20 July 2020 - 01:11
The system cannot find the drive specified
I mean when I click the button in the right side of "sketch file", this prompt would be there.
Saturday, 18 July 2020 - 09:34
New AVR simulator
I have done some installation in vs code on ubuntu by these: http://fabricesalvaire.github.io... how to use it(simavr) for debugging ?
Tuesday, 7 July 2020 - 01:27
ispEnterProgMode: Error status received: Got 0xc0, expected 0x00
So, solution is: One should use "Program" in "Memories", not "Program" in "Production files".   The file in "Memories" is .hex format, while in "Production files" is ELF...
Friday, 13 March 2020 - 04:22
ispEnterProgMode: Error status received: Got 0xc0, expected 0x00
Why? Why? Why?   In Atmel Studio 7.0   There are "program" button in "Device Programming --> Memories" and "Device Programming --> Production file".   this...
Friday, 13 March 2020 - 02:54
ispEnterProgMode: Error status received: Got 0xc0, expected 0x00
Thanks for you all, inspired by your suggestions, I found a solution:     Using an Arduino UNO as bridge.   But there was still an error, when I verified the Flash...
Thursday, 12 March 2020 - 11:39
ispEnterProgMode: Error status received: Got 0xc0, expected 0x00 Thursday, 12 March 2020 - 09:23
ispEnterProgMode: Error status received: Got 0xc0, expected 0x00
I used PC USB port power, when I test the USB voltage, it was 5.13V, while, after I power it for Atmega328p (connected with Atmel ICE), the voltage fall to 0.14V.   and, the...
Thursday, 12 March 2020 - 08:05
ispEnterProgMode: Error status received: Got 0xc0, expected 0x00
I used the chip I have just used in Arduino IDE, so there was bootloader inside, is this the reason?
Thursday, 12 March 2020 - 04:32
ispEnterProgMode: Error status received: Got 0xc0, expected 0x00
This is my wiring.(in attachment)
Thursday, 12 March 2020 - 04:25
ispEnterProgMode: Error status received: Got 0xc0, expected 0x00
Before this prompt, there was another prompt. It said the Device Voltage was wrong, is this the reason?
Thursday, 12 March 2020 - 04:22

Pages