Post Created date
Servo code didn't work...
Here is the wiring:
Monday, 29 November 2021 - 15:37
Servo code didn't work...
I verified the wiring by Arduino IDE servo example, they were OK every time. "require float" because my function "" was this: void write_arm_motors(float motor0, float motor1){...
Monday, 29 November 2021 - 05:57
[TUT][SOFT][GCC] AVR debugging using gdb and AVR Dragon under Linux (Ubuntu)
avr-gdb how to install it on Ubuntu 20.04?
Monday, 29 November 2021 - 04:28
Servo code didn't work...
Now, I wrote it this way: float reading = 0; /* Sensor reading, normalised (i.e., scaled) to be between zero and one. */ /* --------------- Begin Answer to...
Monday, 29 November 2021 - 04:23
Servo code didn't work...
David, you are right, when I altered to avr-gcc chain in CMD, the Timer works.   Now, the problem is ADC: float reading = 0; if(knob == 1){ ADMUX |= (1<...
Saturday, 27 November 2021 - 08:51
Atmega328P Continuous Servo Timer1
Sorry, i tested it just now in Arduino IDE, it didn't work either, it just works in thinkercad simulator.
Friday, 26 November 2021 - 03:52
Servo code didn't work...
Sorry, i tested it just now in Arduino IDE, it didn't work either, it just works in thinkercad simulator.
Friday, 26 November 2021 - 03:52
Servo code didn't work...
I found this thread, it works:https://www.avrfreaks.net/forum/...
Friday, 26 November 2021 - 00:05
Atmega328P Continuous Servo Timer1
Yes, it works.
Friday, 26 November 2021 - 00:03
Servo code didn't work...
I simulated in thinkercad, it didn't work.
Thursday, 25 November 2021 - 23:37
USB couldn't be found in ATmega32u4
I uploaded a photo, while it prompted I hasn't been authorized.   I found the reason - I have not connected UVcc and VBus.    
Thursday, 13 May 2021 - 23:54
I wrote ASM code
Brian Fairchild wrote:There is some argument for jumping to an 'unknown interrupt handler' ???
Wednesday, 12 May 2021 - 11:14

Pages