Type in the full discussion title or a part of it.
Discussion Title Created date
How to program on Ubuntu?
I read this tutorial(https://www.nongnu.org/avr-libc/...), it was said I could compile and link in command line, I want know if I have made a file, how do I program it into...
Monday, 4 January 2021 - 00:24
Is there DS1302 library for libc?
I found all the libraries of DS1302 are for Arduino, it there any ds1302.h and ds1302.c for libc or I should write them by libc based on datasheet?
Saturday, 26 December 2020 - 05:09
【CDC】How to use it in Data Visualizer?
I'm sorry for pasting here, since I could not find better suitable place for this topic.   I found there were RF0-RF1, UART TX/RX, and CDC all in PIC18F57Q43 Curiosity Nano...
Monday, 7 December 2020 - 10:56
SPH and SPL didn't update (asm for ATmega328p)
I used these code:   START: ldi regCommon, LOW(RAMEND) ; init stackpointer out SPL, regCommon ldi regCommon, HIGH(RAMEND) out SPH, regCommonbut, I found in Atmel Studio 7.0...
Friday, 30 October 2020 - 02:31
ask for code testing (asm for ATmega328p)
I wrote an asm program for Atmega328P, so the OCR0A is connected to PD6, and OCR0B to PD5.   In attachment is my code, the first one: code-10-27-good goes well.   Second...
Thursday, 29 October 2020 - 03:37
How to use avr-libc in Atmel Studio ?
I tried Atmel Studio, I found it like CodeBlocks - an IDE.   When I used CodeBlocks, I need to install gcc and set the path in it.   So, my question is, need I install...
Thursday, 30 July 2020 - 08:50
I made an Arduino UNO minimal circuit on breadboard, and want to ICSP it, but I tested, there was no power through ICE, why?  
Sunday, 26 July 2020 - 23:21
The system cannot find the drive specified
When I want to create c++ project from Arduino sketch, it was prompted:   anyone here has met this problem?
Thursday, 16 July 2020 - 11:48
ispEnterProgMode: Error status received: Got 0xc0, expected 0x00
When I used Atmel ICE programming an Atmage328p MCU, the second last step failed:   When I went to "Device Signature", this prompted:   "Failed to enter programming mode...
Thursday, 12 March 2020 - 03:36
[ERROR] Failed to initialize ASF distribution 'category must be a Warning subclass'
When I want to make an assembly language code for ATmega328P in Atmel Studio 7.0.   These was prompted from "Output", how to fix it ?
Wednesday, 19 February 2020 - 10:43