Post Created date
I2C read: Master stops sending clock
david.prentice wrote: Especially when it takes you about 1 minute of your life to attach a ZIP.   That won't work. The entire project is much bigger than this. It would take...
Sunday, 26 April 2020 - 14:28
I2C read: Master stops sending clock
ki0bk wrote: What happens if you do a read/NAK there instead of a read/ACK, does it send a stop then?   Exactly the same. No change.   I've redone the screenshot. The...
Sunday, 26 April 2020 - 13:26
I2C read: Master stops sending clock
Simonetta wrote: The screen shot in the last message has two colors superimposed on each other.  It might have something to do with I2C; I don't know.  The blue could be...
Friday, 24 April 2020 - 15:52
I2C read: Master stops sending clock
Here's a small update: I've replaced my I2C functions with the code from the Arduino Wire library (a C++ class). A few minor tweaks were necessary to make it compile. With this...
Thursday, 23 April 2020 - 20:59
I2C read: Master stops sending clock
Here's the edited part of the graphic: The part marked in red is not happening.     Here's a screenshot of the signals:  
Thursday, 23 April 2020 - 19:19
I2C read: Master stops sending clock
That's exactly what I started with. IIRC it was published somewhere in this forum with no positive or negative feedback. I can't see any difference between the operations and...
Wednesday, 22 April 2020 - 20:07
I2C read: Master stops sending clock
ki0bk wrote: We would recommend you use a known good TWI lib rather then winging your own. Here is a link to some app notes and TWI code for the AVR 0/1 series. https://www....
Tuesday, 21 April 2020 - 19:19
ATtiny1614: EEPROM read/write in C
Now that's a lot of additional questions. I only have one. And if somebody has ever done EEPROM access on a 1-series device with C code, I'd be interested in snippets of it.
Wednesday, 18 March 2020 - 22:13
ATtiny1614: EEPROM read/write in C
AN_2540 is outdated (from 2004). It does not apply to the product it's listed under, as per AN1983.   AN1983 is the one I already found. It does not help.
Wednesday, 18 March 2020 - 20:51
UPDI speed
I have to correct my numbers. After counting the seconds more carefully, the smaller 4k program takes 20 seconds and the larger 8k program takes 40 seconds to flash.   So if...
Thursday, 13 February 2020 - 22:40
UPDI speed
gchapman wrote: mEDBG What exactly is that? I can't find information that describes it and lets me decide whether I have that or can use it.   Quote: UPDI bridge from USB...
Thursday, 13 February 2020 - 22:02
Simple example for touch sensors
I know that sample. But it's far from simple. And not for the hardware I have. That code generator has failed to do something for my hardware so I can't make any use of it.
Friday, 7 February 2020 - 19:56