Type in the full discussion title or a part of it.
Discussion Title Created date
I2C read: Master stops sending clock
I'm trying to access the data from a temperature/humidity sensor (HDC1080) through I2C. The sequence goes like this: Write a few bytes, wait, then read 4 bytes. The basics seem to...
Sunday, 19 April 2020 - 21:31
ATtiny1614: EEPROM read/write in C
Hello,   can somebody please explain how I can read and write bytes to the EEPROM on an ATtiny1614? I've started to read the datasheet but after a few levels of abstraction,...
Wednesday, 18 March 2020 - 20:37
UPDI speed
So my compiled code has 8 kB size. I'm programming the ATtiny1614 via UPDI with pyupdi and the recommended wiring, with a USB-Serial adapter FT232RL. The default speed is 115200...
Thursday, 13 February 2020 - 21:00
Simple example for touch sensors
I've noticed that the ATtiny1614 can also read touch sensors with no external components. The idea is to connect a piece of metal (possibly isolated to protect against ESD) with...
Wednesday, 5 February 2020 - 21:08
millis() and micros() for ATtiny 1-series
Hello,   I'd like to measure some time on the ATtiny1614 to learn more about how much time there is between certain interrupts and other events. Since there is no time...
Thursday, 16 January 2020 - 21:29
Can I have an interrupt when a pin changes?
I'd like to have an interrupt to execute some code when the level of a pin changes from low to high or reverse. No sleep mode involved, so nothing to wake up. The closest...
Thursday, 2 January 2020 - 22:00
How to do CRC16 right?
So there's already tons of information (and code samples and opinions) about CRC16 available. But there's no data on how each of these bits is compatible with anything else. What...
Monday, 30 December 2019 - 16:31
Detect ongoing UART reception
Hello,   I'm using the ATtiny1614's UART with a half-duplex RS-485 driver to connect multiple devices on a shared bus. To avoid data collisions, I'd like to determine whether...
Saturday, 28 December 2019 - 14:30