Post Created date
XMEGA || CRC CHECK bootloader mode doesn't work
@clawson   I am getting checksum values based on the setting of this RESET bit CRC.CTRL = CRC_RESET_RESET0_gc; If the bit is set to CRC.CTRL = CRC_RESET_RESET0_gc,...
Friday, 6 March 2020 - 19:19
XMEGA || Polled mode || Not able to transmit the data
@clawson Thanks for the reply.    how could anyone here possibly know what you have done wrong (apart from sending 0x06 rather than the more obvious 0x36 !) from this...
Tuesday, 3 March 2020 - 20:39
XMEGA || Interrupt in bootloader doesn't work
@frog_jr : Sorry, I made a mistake while copying code to forum, now I changed it. Execution of the ISR code is based on checking if any data has been received. Just for...
Friday, 28 February 2020 - 17:39
XMEGA || Interrupt in bootloader doesn't work
  Hello Guys,    Thanks a lot for giving such descriptive information regarding the question. Really appreciated :)   I and my colleague sat together and tried...
Friday, 28 February 2020 - 17:27
XMEGA || Interrupt in bootloader doesn't work
@clawson    I was suggesting you use: Thanks for the indicating the correction, I will check with that.    Get and use an Atmel-ICE to see what is actually...
Friday, 28 February 2020 - 13:30
XMEGA || Interrupt in bootloader doesn't work
Hello Clawson    based at the usual 0x0000 that attempts to configure and use the same interrupt does that bit work? Yes, I tried it. In application mode interrupt...
Friday, 28 February 2020 - 09:10
XMEGA || Interrupt in bootloader doesn't work
Hello Guys   Thanks for the suggestion. I checked the datasheet of XMEGA E and found that PMIC.CTRL.IVSEL bit should be set to one, to trigger the interrupt in bootloader...
Thursday, 27 February 2020 - 16:28
Atxmega32e5 microcontroller || Bootloader information
There was some initialization issue in the OSC from Atmel START, after I changed, the issue was solved.
Wednesday, 26 February 2020 - 17:09
Atxmega32e5 microcontroller || Bootloader information
Hello Guys,    @Gchapman : Thanks for the reference.   I started using the code which Gchapman referred to previously, and made changes to fit my microcontroller....
Tuesday, 25 February 2020 - 16:36
Atxmega32e5 microcontroller || Bootloader information
Hello Clawson,    Thanks for the information. I referred Atmel START, I found a  bootloader project referring to ATmega328PB, I will go through that and change it...
Friday, 21 February 2020 - 11:20
EEPROM || Not able to write data from address 0x0020 and above
Hello Guys,    @Clawson: Thanks for the reply and inputs. I'm not able to access eeprom.c file, I have access only to eeprom.h (which I added using #include "avr/eeprom....
Tuesday, 18 February 2020 - 16:19
EEPROM || Not able to write data from address 0x0020 and above
Hello Clawson,   Thanks for the reply. I tried with the eeprom_update_float() function, but it didn't help.    Best regards, Chetan
Tuesday, 18 February 2020 - 12:12

Pages