Type in the full discussion title or a part of it.
Discussion Title Created date
Illegal storage class __flash in Jumpstart ImageCraft IDE
I'm trying to build a project that was originally built in Atmel Studio which compiled fine without any errors or warnings, but if I try to build the project in the ImageCraft IDE...
Sunday, 2 August 2020 - 10:57
For loop only works once then completely stops.
I've been working on implementing the WINC1500 MLA driver code to work with the ATMEGA2561 8 bit MCU on a custom PCB board. I'm using the ImageCraft Jumpstart IDE and ATWINC1500...
Sunday, 10 May 2020 - 10:53
Stuck on BOOT_ROM_START with WINC1500 and AT32UC3C1256C MCU
I've been working on developing the WINC1500 WiFi Module to work with the AT32UC3C1256C MCU on a custom PCB Board.  The issue that I've been having is that is the firmware on...
Wednesday, 22 April 2020 - 01:55
Porting from iccavr project to Atmel studio problems with Atmega2561 8 bit MCU
I'm currently in the process of having to port a large project from ICCAVR known as the imagecraft IDE to Atmel Studio 7.0 and have had great difficulty trying to get the Atmel...
Thursday, 5 March 2020 - 12:29
SPI implementation stuck on “while(!spi_is_tx_empty(WINC1500_SPI));”
I'm currently implementing a driver for the WINC1500 to be used with an ATMEGA32 MCU and it's getting stuck on this line of "while(!spi_is_tx_empty(WINC1500_SPI));". The code...
Saturday, 18 January 2020 - 02:18
#error "Need to define M2M_POINTER_SIZE_IN_BYTES"
I'm trying to compile the WINC1500 driver in atmel studio and I'm running into this error saying  "error "Need to define M2M_POINTER_SIZE_IN_BYTES"   I'm using the ...
Monday, 2 December 2019 - 00:25
Trying to compile WINC1500 Driver source code
Hi guys   For the last two days, I have been trying to compile the Atmel WINC 1500 Wi-Fi driver source code in my Atmel studio project. I have been struggling to get it...
Thursday, 28 November 2019 - 12:39