Post Created date
Atmega128L programming by codevision
Hi dear David, Thank you for advice. As you can see in below finally I could connect to Atmega128 by Avrdude and program it. I use this command for this purpose: >>>:...
Tuesday, 17 December 2019 - 07:31
Atmega128L programming by codevision
I had known about the right functionality of this port in advance and when I worked with AVRDUDE no program was using this port.
Sunday, 15 December 2019 - 08:39
Atmega128L programming by codevision
Hi dear David, I did your instruction step by step, but unfortunately I couldn`t 'Program' the ATMEGA1128 by this way.
Sunday, 15 December 2019 - 06:20
Atmega128L programming by codevision
Despite I was sure about fuctional of COM port number 2, AS 7.0 couldn`t conncet to ATMEGA128. You can see the result in below.  
Sunday, 15 December 2019 - 06:16
Atmega128L programming by codevision
Hi, I downloaded Avrdude.exe  and set the parameters as you said (COM# and Toll name(I checked all tools)) but it didn`t work again. As you can see in below all time...
Thursday, 12 December 2019 - 11:19
Atmega128L programming by codevision
Hi, As you told me JTAG doesn`t work. I use your link to define fuse bits but still I can`t connect to ATMEGA128.   Regards, Majid
Tuesday, 10 December 2019 - 09:26
Atmega128L programming by codevision
Hi again, After last discussion, I decide to do these two solution, that you can see in below   First solution: At first I installed AS7.0 and tried to program ATMEGA128...
Tuesday, 10 December 2019 - 08:41
Atmega128L programming by codevision
Thank you David, I will try it and tell you the result.
Monday, 9 December 2019 - 15:13
Atmega128L programming by codevision
No, I want just to program it.
Monday, 9 December 2019 - 13:11
Atmega128L programming by codevision
Thank you dear David, I can find CodeVision AVR 1.25.8, but how can I set the frequency value and other chechboxes?
Monday, 9 December 2019 - 12:26
Atmega128L programming by codevision
The version is 3.12 advanced. Which version should I use? What about settings, how can I set them?
Monday, 9 December 2019 - 10:52
Atmega128L programming by codevision
Dear David,   I used to program my boards by this programmer and Codevision (about five years ago), but I have forgotten the settings of Codevision.   Majid 
Monday, 9 December 2019 - 09:37

Pages