Post Created date
MPLAB Snap
samay wrote: If it's a new SNAP, a lot of them seem to be having trouble out of the box. Regardless, here is what I suggest (to anyone having issues with the thing):   I...
Thursday, 3 October 2019 - 05:23
MPLAB Snap
samay wrote: If it's a new SNAP, a lot of them seem to be having trouble out of the box. Regardless, here is what I suggest (to anyone having issues with the thing):   Hi...
Sunday, 22 September 2019 - 03:24
MPLAB Snap
gchapman wrote:Yes for AVR ISP (SPI), single data pin for AVR TPI and AVR PDI, shared single pin for AVR UPDI (one pin for clock and data, edit : and debugWIRE) Connecting the...
Saturday, 21 September 2019 - 14:58
MPLAB Snap
@gchapman I read your citation, which says: Start by ensuring that the PICkit 4 is in 'EDBG mode', i.e the VID is 0x03eb. This can be done in MPLAB by doing any operation...
Saturday, 21 September 2019 - 06:26
MPLAB Snap
@gchapman I think because the SNAP device can talk to the PIC chip, it may not need emergency recovery, but I may try that at some point, thanks.
Saturday, 21 September 2019 - 05:58
MPLAB Snap
@mraardvark Ah, great idea! I should have thought of that!  So I removed the PIC16F1619 chip from the "curiosity" board and stuck it into the prototype board where the...
Saturday, 21 September 2019 - 05:54
MPLAB Snap
Ok, I tried the "AVR ISP" pinout and SNAP pin-6 (~RESET) never goes low - it's always at nearly Vcc (3.3) and SNAP pin-6 (SCK) is always low - never any clock.  When I bring...
Saturday, 21 September 2019 - 04:24
MPLAB Snap
Hi, thanks for the response - I actually have seen this pinout image before posting, but I don't see how it relates the SNAP data/clock (pin-4/pin-5) to the ATtiny84 SPI ICSP...
Thursday, 19 September 2019 - 03:40
MPLAB Snap
I purchased the SNAP device hoping I could use it to program an ATtiny84 however, the documented pinout of the SNAP and the SPI of the ATtiny84 doesn't seem to align....
Thursday, 19 September 2019 - 02:28
MPLAB Snap
nop
Tuesday, 17 September 2019 - 16:07