Post Created date
Atmega328p hang issue
thanks Kartman,   1. PB0 Pin connected to Induction Loop detector, which is giving Low out , PB0   Internal pull up activated, so that PB0 as Input not floated...
Thursday, 29 August 2019 - 04:51
Atmega328p hang issue
thanks
Wednesday, 28 August 2019 - 06:30
Atmega328p hang issue
thanks a lot  Moe123 ,   I know about Pull up Resistors,   what I am asking, With TVS diode, what might be the Pull up resistor (as per the kartman), 
Wednesday, 28 August 2019 - 06:23
Atmega328p hang issue
you need help to calculate the needed pull-up resistors ?   I need to help on this,    
Wednesday, 28 August 2019 - 06:10
Atmega328p hang issue
thanks Kartman,     How did you determine the pullup value of 1k5?   I need help on this( I am just select lower value resistor), Please help .
Wednesday, 28 August 2019 - 05:59
Atmega328p hang issue
thanks  Kartman ,   You still haven't responded with the power supply leakage measurement   Existing PCB not Available, tomorrow i will get and measure.  ...
Tuesday, 27 August 2019 - 13:54
Atmega328p hang issue
thanks Kartman,   I will follow your suggestion,   here ,   PB1  is getting  Low(0V) and High(5V) from IR sensor.   PB0 is getting Low(0V) from...
Tuesday, 27 August 2019 - 07:59
Atmega328p hang issue
thanks  Moe123 ,   I will Solder directly to the Board as your suggestion,.
Tuesday, 27 August 2019 - 06:27
Atmega328p hang issue
thanks kartman,   here is the details,   1.CN3 and CN5 connectors soldered,on that , Serial to Ethernet Module Inserted. I am  sending  the data from...
Tuesday, 27 August 2019 - 05:47
Atmega328p hang issue
plug in Module, not soldered, it is essential.  
Tuesday, 27 August 2019 - 04:29
Atmega328p hang issue
  Expecting Loop detector output  signal   as  0(low) and 1(high) , digital signal.       Are you going to measure the power supply leakage...
Saturday, 24 August 2019 - 11:05
Atmega328p hang issue
thanks  avrcandies ,   modifications Attached, please suggest.
Saturday, 24 August 2019 - 10:18

Pages