Post Created date
CTC mode PWM generation only when i have pulse on my Input on Attiny13
Hi i slolved the problem but i have an issue with low frequency below 1,5 Khz i am also getting output. What is the problem and what are the issue with mocrocontroller. The result...
Monday, 9 September 2019 - 07:52
Attiny85 to use complementary pwm output using timer 1
Thank you everyone. I solved the problem. To those who look for the same problem #define F_CPU 8000000 #include <avr/io.h> int main() { DDRB |=(1<<PB0)|(1<<...
Friday, 6 September 2019 - 08:14
Attiny85 to use complementary pwm output using timer 1
Hi Clawson i used the term outputs on PB0 and PB1 OR PB3 and PB4. Because i only want 2 outputs that are complementary to each other. The above code is for  trying to get...
Friday, 6 September 2019 - 07:28
CTC mode PWM generation only when i have pulse on my Input on Attiny13
Hello Can you please explain with pseudocode or code for both the methods. I target is the second one you described but first i will go with first one see the result and go on...
Thursday, 8 August 2019 - 07:53
CTC mode PWM generation only when i have pulse on my Input on Attiny13
i found out its the problem of timer because the same timer is used to run CTC mode and PCINT. How can i fix the issue of timer. 
Thursday, 8 August 2019 - 07:00
CTC mode PWM generation only when i have pulse on my Input on Attiny13
I didnot change my code and even the  input is constant (no change) and when i see the outputs in oscilloscope my two outputs (used for switching MOSFET) are not same....
Wednesday, 7 August 2019 - 14:38
CTC mode PWM generation only when i have pulse on my Input on Attiny13
Hello theusch can you tell me about #count for a convenient fraction of second.... what do you mean to say that i didnot understand. if you see my code i had use a timer/counter...
Tuesday, 6 August 2019 - 15:06
CTC mode PWM generation only when i have pulse on my Input on Attiny13
I found out that it is the problem of priority of interrupt. Can i change the priority of ISR?
Tuesday, 6 August 2019 - 11:28
CTC mode PWM generation only when i have pulse on my Input on Attiny13
As per my finding till now the problem may be because of timer  TCCR0B |= (1 << CS00);but donot know how to fix it because same timer is used in PCINT and CTC mode and...
Monday, 5 August 2019 - 14:13
Split from: ATTINY13 timer and interrupts for reading RC receiver signal
Yes i have perfect square signal. I already use RC filter convert into voltage equivalent , read it by ADC pin and checked it and it works fine with that. But now i want to use...
Thursday, 1 August 2019 - 08:33
Split from: ATTINY13 timer and interrupts for reading RC receiver signal
Sorry  sparrow2 and  avrcandies  i didnot understand what u really mean to say because i am new to programming.   
Wednesday, 31 July 2019 - 20:36
Split from: ATTINY13 timer and interrupts for reading RC receiver signal
Hello  Simonetta  You are on the right track as you explained above . I will tell you my project about. My input is coming from the switch. if i press the switch i will...
Wednesday, 31 July 2019 - 20:29

Pages