Post Created date
Solved: ATTiny 414 & Using 32 kHz External Crystal for Waveform Generation (TCA & TCD)
I'm not 100% sure, I pretty sure you can calibrate the internal clock using a crystal. However, I'm not sure if that calibration occurs over time or just once the...
Tuesday, 4 February 2020 - 15:36
Solved: ATTiny 414 & Using 32 kHz External Crystal for Waveform Generation (TCA & TCD)
Hey guys,    Just as a quick update, it looks like I'll be sticking with a standard clock. I was reading the 414 datasheet more this weekend. It looks like for a 32...
Monday, 3 February 2020 - 14:48
Solved: ATTiny 414 & Using 32 kHz External Crystal for Waveform Generation (TCA & TCD)
Makes sense El Tangas, thanks for sharing. Jim, Guilty as charged, a rookie making rookie moves. If I could go back, I’d definitely start with a larger MCU. I think I’d start with...
Wednesday, 29 January 2020 - 19:22
Solved: ATTiny 414 & Using 32 kHz External Crystal for Waveform Generation (TCA & TCD)
Thanks El Tangas,   Yea, I thought using the RTC might be a viable work around since you get can get a waveform from it, I didn't realize how much of a work around it would...
Wednesday, 29 January 2020 - 02:02
Solved: ATTiny 414 & Using 32 kHz External Crystal for Waveform Generation (TCA & TCD)
Thanks kabasan, that was my fear based on the data sheet. I wasn’t sure if there was a way or not, but I figured I would ask. If calibrating the 16/20 MHz clock based on the 32...
Wednesday, 29 January 2020 - 00:04
Solved: ATtiny 412 Multiple Analog Inputs using ADC0
Thanks guys, that was the trick! Something so simple, but I'm glad it is working now. I'm now getting both analog signals using ADC0, & it's working beautifully.  ...
Tuesday, 10 December 2019 - 19:25
Solved: ATtiny 412 & Setting up TCB Timer
Got the timer to work as intended, big thanks again for all the help. I've been reading through the tutorial's link provided by El Tangas - these have been a life saver...
Tuesday, 10 December 2019 - 02:41
Solved: ATtiny 412 & Setting up TCB Timer
Much appreciated guys. The info above is a great start. I'm going to go through all of this today and over the weekend. It's starting to make more and more sense as I go over it....
Friday, 11 October 2019 - 17:19
Solved: ATtiny 412 & Setting up TCB Timer
hmmm, that would probably help...It has been a steep learning curve. I wasn't entirely sure how to set the initialization for the timer, but here's what I got based on other...
Thursday, 10 October 2019 - 19:18
[Solved]ATTiny 402 Setting up Dual PWM pins - Pin 2 (PA6) & Pin 5(PA1)
Just got the 412, & tested it and it works perfectly! No issues setting up the external clock & everything is working as intended now. Thank you so much, this really...
Tuesday, 24 September 2019 - 17:36
[Solved]ATTiny 402 Setting up Dual PWM pins - Pin 2 (PA6) & Pin 5(PA1)
This is awesome, thanks! Polarity shouldn't be a big problem, I can work around that. Once I get the 412 in, I'll test it out. I built the project in MPLAB, & all...
Friday, 20 September 2019 - 13:20
[Solved]ATTiny 402 Setting up Dual PWM pins - Pin 2 (PA6) & Pin 5(PA1)
Cost difference shouldn’t be an issue, it’s pretty similar (maybe $.05 difference at most) I checked the data sheet on the 412, seems to be very similar to the 402 so it should...
Friday, 20 September 2019 - 03:33

Pages