Post Created date
input capture for timing between falling and rising edge
Yes its bit encoding which decoded Manchester.
Wednesday, 31 July 2019 - 14:45
input capture for timing between falling and rising edge
Cool =) This signal is a Slave response sequence which 14-bit 333khz in 42useconds. And i want capture this signal in program when i was sent master request.  My opinion if i...
Wednesday, 31 July 2019 - 11:36
input capture for timing between falling and rising edge
But now im trying 16mHz micros in 1kHz for test code is not working. if these code working i will try for more than kHz. How am i measure burst 400kHz synchronous code? 
Wednesday, 31 July 2019 - 10:51
input capture for timing between falling and rising edge
How did you fixed it this code ? Actual code is now working? Always print Timing 0 :/   I want more than 400kHz capture signal. How am i do that ?
Wednesday, 31 July 2019 - 10:03
Atmega2560 Uart Communication
avrcandies wrote: I wrote both a manchester encoder & decoder for 32bit  packets.  Since both were in assembler & "tight" they could work at very high...
Saturday, 27 July 2019 - 18:15
Atmega2560 Uart Communication
Thx for your reply Jim  I m trying your attachment but these codes baud rate not require for  my system speed. I cant reached 3 us bit toggle timing. I was try...
Friday, 26 July 2019 - 14:57
Atmega2560 Uart Communication
A.sevincik wrote: İt is fixed device i cant change it bit stream. Only reply me when im transmit 28bit packet. Reply had 14 bit. Actually it is running manchester coding bit...
Friday, 26 July 2019 - 11:09
Atmega2560 Uart Communication
İt is fixed device i cant change it bit stream. Only reply me when im transmit 28bit packet. Reply had 14 bit. Actually it is running manchester coding bit stream. Manchester code...
Friday, 26 July 2019 - 11:07
Atmega2560 Uart Communication
Thx for your reply! İ want send 28 bit to the slave and slave response 14 bit reply back to me With no stop bit between 8bit or more than. One packet all of frame. How can i send...
Friday, 26 July 2019 - 07:32
Atmega32u4 Debugging problem.
Ok. i will find a debugger/programmer device. Thx for your reply.
Thursday, 11 July 2019 - 18:24
Atmega32u4 Debugging problem.
Thx for your reply. ım newbie on owm micro's. Im using generally only arduino SDK, but i wanna learn new things. That you say DFU Tool cant debugging my projects? İts True ?
Thursday, 11 July 2019 - 18:04
Atmega32u4 Manchester Coding And Decoding
clawson wrote: The thing about the internet is that you can never know the provenance of anything you just find by googling but when I googled "avr manchester encoding" one of the...
Thursday, 11 July 2019 - 17:49

Pages