Type in the full discussion title or a part of it.
Discussion Title Created date
problems outputting a clock to a pin - ATSAMS70Q21B
I'm trying to output a 2Mhz clock to pin PE0 which has a peripheral B function of TIOA9  which is Timer-Counter 3 (TC3) Channel 0.  I am trying to use START to configure...
Friday, 19 July 2019 - 18:34
Got UART transmit working. But how to do receive? ASF4
Adding the USART driver to START and configuring it as a UART3 and setting pins, baud rate and so on using the START page, and using the driver_examples.c code as a starting point...
Tuesday, 16 July 2019 - 06:04
quick question about const* hw
Where can I find the names for the hw parameter in ASF4 calls such as in the call hri_uart_set_IMR_TXRDY_bit(const void *const hw)   Specifically I need the hw name for UART3...
Tuesday, 16 July 2019 - 00:29
(partially) SOLVED: UART (not USART) with ASF4?
Solved:  I didn't realize that detailed setup info could be entered if you click on the USART_0 driver image in START, so that made setting up the pins to use and the...
Tuesday, 16 July 2019 - 00:00
How to add and update components to START
I need to add some drivers using the START tab in my project, but if I press the Generate Project button, it wants to create a new project.  How do I just add components and...
Monday, 8 July 2019 - 16:53
SOLVED: Can't start an ASF3 project
edit: SOLVED.  It turns out that I needed to do an update from the "Tools- Extensions and Updates" for ASF in order for it to show up again. All good now!   While I'm...
Saturday, 6 July 2019 - 21:41
SOLVED: Can't run simple start program on my own SAMS70 board
SOLVED:  The problem was I did not bother to initialize the clock architecture when using START and apparantly the chip defaults to an external xtal which I do not have on my...
Saturday, 6 July 2019 - 20:00
moving from asf3 to 4 - documentation or examples?
Hi, I wrote this code using ASF3 to write to a spi port and got it to work only because there was fair documentation and examples to use the functions:   Here is a snippit of...
Wednesday, 3 July 2019 - 17:13
Changing part number in Atmel Studio for current project
I created a simple ASF program (some PIO, SDI, PMC) for the ATSAME70 demo board, but now want to run the code on my own ATSAMS70 board.  I changed the part number by...
Tuesday, 2 July 2019 - 19:55