Discussion Title | Created date |
---|---|
uC working but JTAG not communicating after short on JTAG pins Short story: While measuring a signal I incidently made a short on the back of the JTAG connector. The uC is still working, I can see this as the LED that I have in my... |
Thursday, 17 October 2019 - 12:44 |
Strange behaviour after flashing with current limit set for the 5V supply Hello, I have an AT90CAN128 that I can program both with JTAG but also with a CAN bootloader. Today by a mistake I programmed the device with the CAN bootloader with a... |
Monday, 14 October 2019 - 14:09 |
Problem with SW based timer due to execution time ok fixed tasks Hello, Today while casually testing a new feature of my application, 1 pin that goes on for 2s and then off for 10s, I noticed that the pin duration values are quite inaccurate,... |
Friday, 13 September 2019 - 14:58 |
Self Intermittent problem with self shutdown circuit Hello, I have a strange intermittent problem with a self shutdown circuit that is not working as it is supposed to, for an AT90CAN128 The idea is the following: -the... |
Monday, 19 August 2019 - 08:10 |