Type in the full discussion title or a part of it.
Discussion Title Created date
USART working Only When Freq=1Mhz ,Fuse bits are set correctly(I think))
hello .. I know This is repeated ... I'm using ATmega8 , The problem is that when i set the clock to internal RC 1MHZ (in fuse bits and code) with buad rate set to 2400 (error...
Thursday, 17 September 2020 - 16:11
Where To Find Hall Effect Sensor in old Electronics?
Hi I'm Unable to find any kind of Hall Effect Sensor in my region, All what i can find are those expensive arduino shield which i don't like to work with (very big sized), I used...
Thursday, 30 April 2020 - 09:19
Multiple Interrupts in INT0 But only one signal - [ SOLVED ]
NewBie here... I've a hall effect shield which is basically a hall effect ic with a compactor ic to convert the analog output of the first ic to digital output (5v or 0v). it...
Monday, 23 December 2019 - 22:14
Passing Macros to other c files with no extra files
I'm used to make a c file for things i use a lot in my code like a c file for timer0  , adc etc Now to the main subject when trying to make a c file to deal with the 8 bit...
Wednesday, 27 November 2019 - 19:17
IR Data Transfer with USART
Hello Freaks .. I want to transfer about 480 byte from one atmega8 to another 1m(or less) far atmega8. I will use USART protocol because it is easier to decode on the receiver...
Thursday, 26 September 2019 - 19:54
Calibrating Internal Oscillator in Atmega8 ( And also Pic16f)
Hello.. I'm making serval projects where I need very precise clock and timer results but I don't have enough pins for an external oscillator so I need to use an internal one, I've...
Thursday, 29 August 2019 - 12:27
a small Pointers through Functions question from a noob.. please help
Hi so I wrote some function ( or better say copied) for USART  I want to design a function that i pass to it a string or an array via pointers and it send it by ...
Sunday, 21 April 2019 - 15:22
ATmega8 with UART,Confused with Clocks
First I have read  these : Using the USART with AVR-GCC and Every pinned forum    and i have done alot (like alot) of googeling .. no thing helped .. so please help...
Friday, 19 April 2019 - 17:38