Type in the full discussion title or a part of it.
Discussion Title Created date
Write bit to pin value
Hi guys. Quick one today.   I want to read the value of a pin and set a bit in a binary number to this value.   I have thought of the following way; buttonValue = !!(...
Tuesday, 21 July 2020 - 07:19
Failed to enter programming mode
  Morning guys.   I recently built a new circuit and when I try to connect to it with my programmer I get the following message:   Failed to enter programming mode...
Friday, 10 April 2020 - 06:44
Error 127, command not found
Hi guys,   I'm having a problem compiling a project. This is not a new problem, many others have had it but I can't seem to fix it. Here's the output from Atmel Studio...
Thursday, 13 February 2020 - 13:00
Reading information over serial
Hi guys.   I'm busy trying to write instructions from a little terminal program on my pc and read the microcontrollers output in the same terminal. On the pc side I can read...
Monday, 20 January 2020 - 10:18
PWM not working, clock issue?
I have written a little program for the 328P and tested it on an arduino pro mini running at 8MHz 3,3v. Pushing a button turns the TMR0 output on PD6 on with a CTC driven pwm...
Wednesday, 18 December 2019 - 13:40
Datasheet interpretation question
  Hi guys.   I have a quick question about the register naming in datasheets. I'm looking at the datasheet of the mega328pb.   My question is how do I interpret...
Thursday, 7 November 2019 - 07:00
Can't read PC0 and PC1
Hi Guys,   I'm stuck with a problem. As in the title I can't read the PC0 and PC1 register when they are set as inputs. I am trying to read an 8 button array.   Here's...
Wednesday, 15 May 2019 - 19:06
Debouncing slowing my code
Hi guys,   This is my first post on here. I've been referencing these forums a lot since moving from the Arduino to AVR and have found them very helpful.   I am however...
Saturday, 30 March 2019 - 19:02