Post Created date
USB plug-to-plug
< You can find some products, they don't need to know too much procedural knowledge. Use the editor in the background of the program to write the visual interface.> 
Thursday, 14 February 2019 - 02:14
USB plug-to-plug
  You can find some products, they don't need to know too much procedural knowledge. Use the editor in the background of the program to write the visual interface.
Thursday, 14 February 2019 - 02:14
[How to] 9 Things to Consider When Selecting a Cover Glass for your Capacitive Touch Sensor
  This article has a lot of harvest, thanks
Monday, 11 February 2019 - 06:53
problem regarding capacitive touch buttons
Rathna Dinesh wrote: Firstly analyse the false touch detection issue is due to over-sensitivity or due to nearby noise sources.   Try reducing gain parameter (use GAIN_1) and...
Monday, 11 February 2019 - 06:50
Touch without Panel
  Refer to the relevant manual: Atmel-42119-SAM-D20-D21-System-Clock-Management-Driver-SYSTEM-CLOCK_Application-Note_AT03259 You can set this up, try it.
Monday, 11 February 2019 - 06:48
Asking for help with writing driver for "LCD TFT 3.5" by C language for Atmega32
  You can try Stone's smart TFT LCD module. It does not require much programming knowledge to easily complete your project.
Monday, 11 February 2019 - 06:37
Issue with interfacing an SD card with ATmega32u4
Quackers wrote: Problem solved. Turned out to be a bad connection between the SD card holder and the PCB. Not sure which pin it was, but I re-soldered all pins and the issue went...
Monday, 11 February 2019 - 06:25