Post Created date
Sam e70 custom board TCF command error
Can we see the schematic?
Wednesday, 14 April 2021 - 05:41
Preprocessor, print value
That's how the preprocessor works unfortunately. It is pure substitution of text.   I have had the same problem. My solution was to define an additional symbol with the...
Wednesday, 3 March 2021 - 07:25
Button debouncing.
Isn't the logic inverted for the button? I.e. if it is pressed, then the value of PIND should be 0. When not pressed, it should be 1.
Thursday, 11 February 2021 - 13:57
Thermal Vias
tellSlater wrote: hmmm seems a bit strange to use. I would expect something more automated to exist. It will do for now though, thank you! Maybe you should just use a regular...
Tuesday, 2 February 2021 - 20:14
Interrupt Driven UART issue
Well there are a bunch of flaws in your code, but the biggest issue is probably that you must declare receivedByte as follows: volatile char receivedByte;Are you are sure you...
Monday, 18 January 2021 - 20:19
Car key remote
Junk yard key fobs are quite expensive. I recently considered buying one for my Volkswagen Passat 2008. Turned out they cost at least 500 SEK - about 50 EUR/USD. Instead I bought...
Wednesday, 30 December 2020 - 18:55
Car key remote
If you take a photo of the other side of the PCB and post here we can try to recreate the schematic and figure out what component is missing. Looks like a very simple circuit.
Wednesday, 30 December 2020 - 09:10
need help to manipulate stepper pulses
cbkulatunge wrote:only option is replace the driver. the problem is stepper pulse is too fast. Too fast for what?   cbkulatunge wrote:pulse frequency is fixed from main...
Sunday, 20 December 2020 - 08:00
[solved] Whither CPU clock cycle counter in AS7 M4809 simulator?
Debug -> Windows -> Processor status -> Cycle counter?
Friday, 18 December 2020 - 07:17
ATtiny85 - ISR Toggle Only Works on Powers Of Two
Avoid the division and reset the counter instead.   // occurs at 10khz ISR(TIMER1_COMPA_vect){ counter++; // Avoid division if (counter == 42) { speaker.toggle...
Tuesday, 15 December 2020 - 05:58
ISR(USART0_RX_vect: reset static index when opening the serial port
Magellan1 wrote: Now I 'm sending the full string [10] + vbCr. These are 2 concatenated integers.  Magellan1 wrote: I thought to split the 32 bits into 2 x 16, but that does...
Sunday, 15 November 2020 - 13:10
Battery Monitoring?
How about this circuit? When the MCU has power it can turn on Q1 through R2 which turns on Q2 so that the voltage across R3 becomes Vbb (the battery voltage to measure). The MCU'...
Thursday, 12 November 2020 - 20:35

Pages