Post Created date
[SAMD51] I2C configuration
call is successful.While using 0x50 as slave address. But when we are using 0x51 ,the call is not successful.   Thanks
Tuesday, 23 April 2019 - 12:42
[SAMD51] I2C configuration
yes ,the call is successful.(API is returning 0)
Tuesday, 23 April 2019 - 12:37
[SAMD51] I2C configuration
Hi Lajon, sorry for the inconvenience. We are not using any variable for register address. For representation we have used the name. Please find our actual code below.  ...
Tuesday, 23 April 2019 - 11:45
[SAMD51] I2C configuration
Hi Lajon,               i2c_m_sync_set_slaveaddr(&I2C_0, 0x50, I2C_M_SEVEN);        // slave address = 0x50 because...
Tuesday, 23 April 2019 - 10:15
[SAMD51] I2C configuration
Hi Lajon,   Thanks for your inputs.   >>>Your multi byte io_write should work for writing but for random read (where there is need to send an address and...
Tuesday, 23 April 2019 - 07:15
[SAMD51] I2C configuration
Hi Lajon,   Thanks for your inputs.   We have used two separate io_write() functions for sending the lower 8 bit address and data. From your input ,we came to know each...
Tuesday, 16 April 2019 - 13:31
[SAMD51] I2C configuration
Hi all,   We are communicating SAMD51 (Master) and At24C16 EEPROM(Slave) using I2C. We have selected the standard/fast mode and set the bus clock speed as 100Khz.  ...
Friday, 12 April 2019 - 12:50
Temperature sensor in SAMD51
Hi, We have read the temperature from PTAT and CTAT channels of sensor and calculated the Tc ,Tp values. We read the calibration parameters from NVM region which are needed for...
Thursday, 28 February 2019 - 04:59
Temperature sensor in SAMD51
Hi, We have configured the MUXPOS field (0x1C)  as per the samd51 data sheet section 45.8.4 Input Control for selecting the temperature sensor. But the AD conversion is...
Friday, 8 February 2019 - 10:30
SERCOM SPI - Data register
Hi,   We have enabled the bit, when spi module is disabled. But when we flashed this binary on board  , the board itself not booting properly (User led is not...
Monday, 21 January 2019 - 12:29
SERCOM SPI - Data register
Hi,   Thank you. We are done with the SPI single byte read and write operation. Now we want to use spi multi byte transfer.   According to  SAMD51 datasheet, We...
Monday, 21 January 2019 - 10:17
SAMD51 - DAC operation
Matze_Matthias wrote:Did that mean that you only use one DAC channel or both at the same time on the same value ? Thats some point i never try. I will try that tomorrow.  ...
Friday, 11 January 2019 - 04:55