Post Created date
Serial number for each USB ACM device
So in descriptors.h you have and enumstruct that look lie this if you have 2 interfacese   enum InterfaceDescriptors_t { INTERFACE_ID_CDC1_CCI = 0, /**< CDC1 CCI interface...
Friday, 27 July 2018 - 10:21
Serial number for each USB ACM device
So if i understand this correctly from my coworker, when you use the command udevadm info -a -p $(udevadm info -q path -n /dev/ttyACM0) you can see all the information thats given...
Friday, 27 July 2018 - 09:37
I2C master does not want to connect to MCP9808
I2C_master.c*
Thursday, 19 July 2018 - 15:51
I2C master does not want to connect to MCP9808
#UPDATE   so the bit shifting of the address was indeed needed to work but it wasnt the reason that twst returned 32. I was putting breakpoints in the start function of...
Wednesday, 18 July 2018 - 07:20
Adafruit to AVR
#UPDATE   so I changed the adafruitlibrary to C and used I2C_master instead of wire.h. There were some changes I had to make in I2C_masters, like shifting the address to...
Wednesday, 18 July 2018 - 07:17
I2C master does not want to connect to MCP9808
So I2C doenst bit shift the adress and add a r/w bit. So that might be the problem, im checking it right now.   #EDIT yes this was the problem thank you!
Tuesday, 17 July 2018 - 08:19
Adafruit to AVR
The reason I'm using AS7 (Its called AtmelStudio, but I downloaded it recently so Im pretty sure its AS7) is because Im working in a project, and we are all using Atmelstudio.
Monday, 9 July 2018 - 15:38
Adafruit to AVR
Not sure why you would need the results. The program isnt that complicated, the hardware works good, everything works. I just want to know if I can replace my micro for just the...
Monday, 9 July 2018 - 14:48
Adafruit to AVR
Yes I've seen this, but listen up. The code is working just fine. But its working on the micro pro with the Arduino IDE. But im going to switch to just the Atmega 32u4 chip and...
Monday, 9 July 2018 - 14:28
Adafruit to AVR
I was thinking the same thing. Im not able to test it yet, because im gonna need a programmer first. But I wasnt able to find the awnser so I made this post.    
Monday, 9 July 2018 - 14:15