Post Created date
CTC Behaves differently with different timers in atmega32.
.
Sunday, 26 January 2020 - 12:43
Have a problem with reading Gyroscope value from GY-801
Sorry ,this is unused function i already commented it , but i put it by mistake now i am going to remove it .
Saturday, 28 September 2019 - 16:22
Have a problem with reading Gyroscope value from GY-801
Thanks for your advice ,but i have done this and i am asking what is the problem because i can't find where is the problem after reading documentation and every thing. I...
Saturday, 28 September 2019 - 13:56
Have a problem with reading Gyroscope value from GY-801
This was my last results : 1-The magnetometer values in all direction varied correctly. 2-The accelerometer  values is is constant equal zero in all direction 3-The gyro's...
Saturday, 28 September 2019 - 04:53
Have a problem with reading Gyroscope value from GY-801
I promise I will try it if GOD(Allah) ease to me to get one.
Wednesday, 25 September 2019 - 22:17
Have a problem with reading Gyroscope value from GY-801
Firstly atmega32 i2c's have pull up resistor internally ,secondly i saw after every step the status register by debugging through UART and every thing is ok   MrKendo...
Wednesday, 25 September 2019 - 22:14
Have a problem with reading Gyroscope value from GY-801
I am running at 400 KHZ frequency ,but i am connecting with jumpers without external pull up resistor ,but you should know that i used the same things(jumpers and the same...
Wednesday, 25 September 2019 - 19:02
Have a problem with reading Gyroscope value from GY-801
Thanks for modification
Wednesday, 25 September 2019 - 05:01
Have a problem with reading Gyroscope value from GY-801
211 which equivalent to default value of GYRO Who AM I register i think the problem in updating the registers does'nt update their values or could the problem on my code
Wednesday, 25 September 2019 - 05:00
Have a problem with reading Gyroscope value from GY-801
The problem when i read from my GY-801 the value is constant could you help 
Tuesday, 24 September 2019 - 11:44
Have a problem with reading Gyroscope value from GY-801
Mine of course why you are asking ???  
Tuesday, 24 September 2019 - 11:42
Bit Rate Generator Unit
Thanks for explanation ,could you tell me please why equation of clock is like shown above 
Friday, 21 June 2019 - 12:31

Pages